WP12722803W Whirlpool Door Support
This Refrigerator Flipper Assembly, White creates an airtight seal between the doors on your French Door refrigerator. This flipper assembly attaches to the left door and includes the mullion heater. In order to replace the part, remove the screw from the flipper and lift it upward. Pop the wire harness loose, and replace with the new flipper. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Flipper Assembly, White
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Flipper Assembly, White
• Tools Needed: Multi screwdriver
Weight : 5.6034 lbs
Dimension : 40.7874 x 4.3307 x 4.4094
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Refrigerator Flipper Assembly, White creates an airtight seal between the doors on your French Door refrigerator. This flipper assembly attaches to the left door and includes the mullion heater. In order to replace the part, remove the screw from the flipper and lift it upward. Pop the wire harness loose, and replace with the new flipper. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Flipper Assembly, White
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Flipper Assembly, White
• Tools Needed: Multi screwdriver
Weight : 5.6034 lbs
Dimension : 40.7874 x 4.3307 x 4.4094
Write Your Own Review
The following parts are replaced by this product
- 67003434
- 67003263
- 67002953
- 8208249
- 67003265
- 12722803W
- 12722803C
- 12732501W
DIY Guide for Replacing the Whirlpool WP12722803W Rail-Mullion
Replacing your rail-mullion in your Whirlpool dishwasher is an easy job that can be completed in just a few simple steps. This guide will walk you through all of the steps necessary to safely and successfully replace your Whirlpool WP12722803W rail-mullion.
Step 1: Shut off the power supply. Before beginning any repairs, it’s important to make sure the power supply to your dishwasher is shut off. Make sure both the circuit breaker and outlet that powers your dishwasher is switched off before proceeding with the repair.
Step 2: Open the dishwasher door. Carefully and slowly open the dishwasher door, ensuring that nothing is obstructing the opening. Once the door is opened, grab hold of the sides of the door and pull it outwards until it is completely removed from the base of the dishwasher.
Step 3: Remove the screws. With the door removed, locate the screws along the sides of the inner wall of the dishwasher that attach the rail-mullion. Using a Phillips head screwdriver, unscrew the screws, one at a time, and remove them from the dishwasher.
Step 4: Pull out the rail-mullion. Grasp the rail-mullion firmly and pull it out of the dishwasher. There may be some resistance, but with a firm grip, the rail-mullion should come out smoothly.
Step 5: Install the new rail-mullion. Take the new rail-mullion and slide it into the opening in the dishwasher, ensuring that it is aligned properly. Once it is in place, use the screws to attach the rail-mullion to the side of the dishwasher. Make sure the screws are tightened securely.
Step 6: Replace the dishwasher door. Once the rail-mullion is in place, take the dishwasher door and slide it back into the base of the dishwasher. Securely fasten the screws back into place and close the door.
Step 7: Turn on the power supply. Finally, make sure the power supply to your dishwasher is turned back on. With the Rail-mullion properly replaced, your Whirlpool dishwasher is ready to use!
Congratulations! You have successfully replaced the Whirlpool WP12722803W Rail-Mullion.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your rail-mullion in your Whirlpool dishwasher is an easy job that can be completed in just a few simple steps. This guide will walk you through all of the steps necessary to safely and successfully replace your Whirlpool WP12722803W rail-mullion.
Step 1: Shut off the power supply. Before beginning any repairs, it’s important to make sure the power supply to your dishwasher is shut off. Make sure both the circuit breaker and outlet that powers your dishwasher is switched off before proceeding with the repair.
Step 2: Open the dishwasher door. Carefully and slowly open the dishwasher door, ensuring that nothing is obstructing the opening. Once the door is opened, grab hold of the sides of the door and pull it outwards until it is completely removed from the base of the dishwasher.
Step 3: Remove the screws. With the door removed, locate the screws along the sides of the inner wall of the dishwasher that attach the rail-mullion. Using a Phillips head screwdriver, unscrew the screws, one at a time, and remove them from the dishwasher.
Step 4: Pull out the rail-mullion. Grasp the rail-mullion firmly and pull it out of the dishwasher. There may be some resistance, but with a firm grip, the rail-mullion should come out smoothly.
Step 5: Install the new rail-mullion. Take the new rail-mullion and slide it into the opening in the dishwasher, ensuring that it is aligned properly. Once it is in place, use the screws to attach the rail-mullion to the side of the dishwasher. Make sure the screws are tightened securely.
Step 6: Replace the dishwasher door. Once the rail-mullion is in place, take the dishwasher door and slide it back into the base of the dishwasher. Securely fasten the screws back into place and close the door.
Step 7: Turn on the power supply. Finally, make sure the power supply to your dishwasher is turned back on. With the Rail-mullion properly replaced, your Whirlpool dishwasher is ready to use!
Congratulations! You have successfully replaced the Whirlpool WP12722803W Rail-Mullion.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
