W10884390 Whirlpool Refrigerator Ice Maker Assembly
This Bottom Freezer Refrigerator Ice Maker Assembly receives water from the home's water inlet valve and then holds the water inside the device until the water is frozen solid. It then ejects the ice and refills again until the ice bucket is full. This kit includes (1) ice cube mold with control device. This is an accessory that can be used across several brands; check to see if your model number is compatible. Installing this accessory will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. Be sure to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this kit. You must also turn off the water supply to the refrigerator before installation. Recommended Item: You may also need an Ice Bucket (item WPW10171529), Water Valve (item WPW10498976), Water Line Installation Kit (item 8003RP) and Fill Tube to complete this installation. Helpful Tip: Installing a Water Filter to a new or existing water supply line will improve the taste of your appliance’s water and ice.
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Bottom Freezer Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver, standard pliers and a small crescent wrench
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Bottom Freezer Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver, standard pliers and a small crescent wrench
Weight : 4.9353 lbs
Dimension : 14.44 x 7.44 x 7.38
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Bottom Freezer Refrigerator Ice Maker Assembly receives water from the home's water inlet valve and then holds the water inside the device until the water is frozen solid. It then ejects the ice and refills again until the ice bucket is full. This kit includes (1) ice cube mold with control device. This is an accessory that can be used across several brands; check to see if your model number is compatible. Installing this accessory will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. Be sure to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this kit. You must also turn off the water supply to the refrigerator before installation. Recommended Item: You may also need an Ice Bucket (item WPW10171529), Water Valve (item WPW10498976), Water Line Installation Kit (item 8003RP) and Fill Tube to complete this installation. Helpful Tip: Installing a Water Filter to a new or existing water supply line will improve the taste of your appliance’s water and ice.
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Bottom Freezer Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver, standard pliers and a small crescent wrench
Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• Package contains (1) Bottom Freezer Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver, standard pliers and a small crescent wrench
Weight : 4.9353 lbs
Dimension : 14.44 x 7.44 x 7.38
Write Your Own Review
The following parts are replaced by this product
- W10377152
- W10469286
- WPW10469286
- WPW10377152
Replacing the W10884390 Whirlpool Refrigerator Ice Maker Assembly
Tools & Materials Needed:
-Screwdriver
-Vise grips
-Replacement W10884390 Whirlpool Refrigerator Ice Maker Assembly
Instructions:
1. Unplug the refrigerator and shut off the water supply line that runs to the ice maker.
2. Locate the screw near the top of the refrigerator wall that secures the ice maker assembly. Use a screwdriver to remove the screw.
3. With vise grips, carefully pull on the ice maker assembly from the wall.
4. Remove any plastic plugs covering the two wires connected to the assembly. Disconnect both wires from the ice maker assembly.
5. Place the new replacement W10884390 Whirlpool Refrigerator Ice Maker Assembly into the wall. Secure the assembly with the screw removed in step 2.
6. Plug the two wires back into the new ice maker assembly and cover the connections with the plastic plugs.
7. Turn on the water supply line and plug the refrigerator back in.
8. If the ice maker begins making noise, it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools & Materials Needed:
-Screwdriver
-Vise grips
-Replacement W10884390 Whirlpool Refrigerator Ice Maker Assembly
Instructions:
1. Unplug the refrigerator and shut off the water supply line that runs to the ice maker.
2. Locate the screw near the top of the refrigerator wall that secures the ice maker assembly. Use a screwdriver to remove the screw.
3. With vise grips, carefully pull on the ice maker assembly from the wall.
4. Remove any plastic plugs covering the two wires connected to the assembly. Disconnect both wires from the ice maker assembly.
5. Place the new replacement W10884390 Whirlpool Refrigerator Ice Maker Assembly into the wall. Secure the assembly with the screw removed in step 2.
6. Plug the two wires back into the new ice maker assembly and cover the connections with the plastic plugs.
7. Turn on the water supply line and plug the refrigerator back in.
8. If the ice maker begins making noise, it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
