WP33001789 Whirlpool Blower Housing Assembly

DIY Guide to Replacing a Whirlpool WP33001789 HOUSING- BULB

Replacing the bulb housing in your Whirlpool WP33001789 oven can be completed in less than 30 minutes and doesn't require any special tools. Follow this simple, step-by-step guide to complete the process quickly and safely.

1. Unplug the power cord of the oven from the electrical outlet.

2. Take off the oven door by opening it and pushing the retaining clips on each side.

3. Remove the screws that secure the control panel and then remove the panel from the oven.

4. Remove the screws that secure the light socket to the inner wall of the oven and then disconnect the wires from the back of the socket.

5. Lift the bulb housing out of the oven, taking care not to damage any wires or components in the process.

6. Insert the new bulb housing and secure it with the screws you removed earlier.

7. Reconnect the wires to the back of the socket and secure the socket in place.

8. Reattach the control panel and oven door, making sure the retaining clips are securely in place.

9. Plug in the power cord and test the oven to make sure it is working properly.

Congrats! You have successfully replaced the Whirlpool WP33001789 HOUSING- BULB without professional help!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.