3374711 Whirlpool Dishwasher Frame O/S1
This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.
Weight : 37.7678 lbs
Dimension : 31.44 x 5.82 x 28.69
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.
Weight : 37.7678 lbs
Dimension : 31.44 x 5.82 x 28.69
Write Your Own Review
The following parts are replaced by this product
- 3374018
- 3374023
Replacing the Frigidaire 241987962 drawer is a relatively straightforward process that can be completed with minimal tools. This guide will provide you with easy-to-follow DIY instructions to help you successfully replace your Frigidaire drawer.
Materials:
-New Frigidaire drawer (241987962)
-Philips head screwdriver
-Flathead screwdriver
-Needle-nose pliers
Step 1: Gather the necessary tools and parts. Once you have all of the materials needed, turn off the power source.
Step 2: Pull the drawer out as far as possible without detached from the hinges, and unscrew the two screws on either side of the drawer using the Philips head screwdriver.
Step 3: Lift the drawer slightly and use the flathead screwdriver to remove the two hinge arms by prying them off carefully.
Step 4: With the drawer completely out of the refrigerator, detach the wires connecting the drawer to the back wall using the needle-nose pliers. Then, remove the screws holding the drawer in place and detach it from the unit.
Step 5: Place the new Frigidaire drawer into position, making sure it is aligned correctly and all the screws are tightened securely.
Step 6: Connect the electric wires, making sure that all connections fit tightly.
Step 7: Carefully reattach the hinge arms to the sides of the refrigerator, then secure the drawer in place by screwing in the two screws on either side.
Step 8: Push the drawer into the refrigerator and turn on the power source to make sure that the drawer is working correctly.
Now you have successfully replaced your Frigidaire drawer!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Materials:
-New Frigidaire drawer (241987962)
-Philips head screwdriver
-Flathead screwdriver
-Needle-nose pliers
Step 1: Gather the necessary tools and parts. Once you have all of the materials needed, turn off the power source.
Step 2: Pull the drawer out as far as possible without detached from the hinges, and unscrew the two screws on either side of the drawer using the Philips head screwdriver.
Step 3: Lift the drawer slightly and use the flathead screwdriver to remove the two hinge arms by prying them off carefully.
Step 4: With the drawer completely out of the refrigerator, detach the wires connecting the drawer to the back wall using the needle-nose pliers. Then, remove the screws holding the drawer in place and detach it from the unit.
Step 5: Place the new Frigidaire drawer into position, making sure it is aligned correctly and all the screws are tightened securely.
Step 6: Connect the electric wires, making sure that all connections fit tightly.
Step 7: Carefully reattach the hinge arms to the sides of the refrigerator, then secure the drawer in place by screwing in the two screws on either side.
Step 8: Push the drawer into the refrigerator and turn on the power source to make sure that the drawer is working correctly.
Now you have successfully replaced your Frigidaire drawer!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
