WPY54414 Whirlpool Dryer Idler Pulley
The Dryer Idler Pulley Kit sits between the motor and the drum of the dryer, putting tension on the drive belt. The main reason for replacing the entire assembly is when the shaft has deteriorated and the idler wheel no longer spins. This kit comes with a tri-ring and washer. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Drive Belt (item 661570V). The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. If the drum will not turn when the dryer is turned on the belt is likely broken.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Idler Pulley Kit
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Idler Pulley Kit
• Tools Needed: Multi screwdriver
Weight : 17.093500 lbs
Dimension : 18.000000 x 11.620000 x 10.750000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dryer Idler Pulley Kit sits between the motor and the drum of the dryer, putting tension on the drive belt. The main reason for replacing the entire assembly is when the shaft has deteriorated and the idler wheel no longer spins. This kit comes with a tri-ring and washer. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Drive Belt (item 661570V). The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. If the drum will not turn when the dryer is turned on the belt is likely broken.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Idler Pulley Kit
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Idler Pulley Kit
• Tools Needed: Multi screwdriver
Weight : 17.093500 lbs
Dimension : 18.000000 x 11.620000 x 10.750000
Write Your Own Review
The following parts are replaced by this product
- 54414
- Y54414
DIY Instructions for Replacing the WPY54414 Whirlpool Idler Pulley
Are you experiencing problems with your Whirlpool washer? If so, replacing the WPY54414 idler pulley may be the answer. This idler pulley helps ensure your washer functions properly, but it can become damaged over time. It's easy to replace the WPY54414 Whirlpool idler pulley yourself with a few simple steps. These DIY instructions will help guide you through the process.
Tools Needed:
-Screwdrivers
-Socket wrench
-Wrench (optional)
-Replacement WPY54414 Whirlpool idler pulley
Step 1: Unplug the washer from its power source. This is to make sure you don't accidentally electrocute yourself while performing this repair.
Step 2: Remove the screws that hold the front panel or back cover of the washer in place. Carefully set aside the screws and remove the panel or cover.
Step 3: Locate the idler pulley. It is usually located near the motor and belt.
Step 4: Disconnect the wiring harness leading to the pulley.
Step 5: Remove the mounting screws that hold the old pulley in place.
Step 6: Take the old pulley out of the washer and replace it with the new WPY54414 Whirlpool idler pulley.
Step 7: Reattach the wiring harness. Then, secure the pulley in place with the mounting screws.
Step 8: Replace the front panel or back cover, and secure the screws.
Step 9: Plug the washer back in and test it out to make sure the repair was successful.
Congratulations! You just successfully replaced your WPY54414 Whirlpool idler pulley. Now your washer should be functioning correctly again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you experiencing problems with your Whirlpool washer? If so, replacing the WPY54414 idler pulley may be the answer. This idler pulley helps ensure your washer functions properly, but it can become damaged over time. It's easy to replace the WPY54414 Whirlpool idler pulley yourself with a few simple steps. These DIY instructions will help guide you through the process.
Tools Needed:
-Screwdrivers
-Socket wrench
-Wrench (optional)
-Replacement WPY54414 Whirlpool idler pulley
Step 1: Unplug the washer from its power source. This is to make sure you don't accidentally electrocute yourself while performing this repair.
Step 2: Remove the screws that hold the front panel or back cover of the washer in place. Carefully set aside the screws and remove the panel or cover.
Step 3: Locate the idler pulley. It is usually located near the motor and belt.
Step 4: Disconnect the wiring harness leading to the pulley.
Step 5: Remove the mounting screws that hold the old pulley in place.
Step 6: Take the old pulley out of the washer and replace it with the new WPY54414 Whirlpool idler pulley.
Step 7: Reattach the wiring harness. Then, secure the pulley in place with the mounting screws.
Step 8: Replace the front panel or back cover, and secure the screws.
Step 9: Plug the washer back in and test it out to make sure the repair was successful.
Congratulations! You just successfully replaced your WPY54414 Whirlpool idler pulley. Now your washer should be functioning correctly again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
