37575 Speed Queen Washer Leg Spring Tall Tub

Replacing the 37575 Speed Queen Washer Tall Tub Leg Spring

1. Unplug the washer and move it away from anything that could be in the way of working.

2. Turn the washer onto its back so you can access the underside of the washer.

3. Remove the four screws that are holding the tub leg to the base of the washer using a Phillips screwdriver.

4. Pull the old leg spring off the two plastic pegs and carefully remove them from the washer.

5. Place the new leg spring onto the two plastic pegs, ensuring that it is oriented the same way as the old one.

6. Replace the four screws that were removed in step three and tighten them securely.

7. Turn the washer upright and plug it back in.

8. Test the washer to ensure that the new leg spring is functioning correctly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.