WB23T10015 GE Oven Sensor Probe
GE General Electric Hotpoint Sears Kenmore Range Stove Oven Temperature SENSOR PROBE WB23T10015
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.136900 lbs
Dimension : 7.874000 x 2.362200 x 1.023600
GE General Electric Hotpoint Sears Kenmore Range Stove Oven Temperature SENSOR PROBE WB23T10015
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.136900 lbs
Dimension : 7.874000 x 2.362200 x 1.023600
Write Your Own Review
1. Begin by unplugging the range from its power source to ensure your safety while working.
2. Using a Phillips screwdriver, remove the screws on the back of the oven, which secures the rear panel in place.
3. Once the rear panel is removed, locate the WB23T10015 GE Sensor probe and disconnect the wiring harness.
4. Pull out the old sensor probe and remove it from the oven wall.
5. Insert the new WB23T10015 GE Sensor Probe into the hole in the oven wall and secure it with the included screws.
6. Reconnect the wiring harness to the new sensor probe.
7. Replace the rear panel and secure the screws.
8. Plug the range back into its power source.
9. Test the new sensor probe to ensure it is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Using a Phillips screwdriver, remove the screws on the back of the oven, which secures the rear panel in place.
3. Once the rear panel is removed, locate the WB23T10015 GE Sensor probe and disconnect the wiring harness.
4. Pull out the old sensor probe and remove it from the oven wall.
5. Insert the new WB23T10015 GE Sensor Probe into the hole in the oven wall and secure it with the included screws.
6. Reconnect the wiring harness to the new sensor probe.
7. Replace the rear panel and secure the screws.
8. Plug the range back into its power source.
9. Test the new sensor probe to ensure it is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
