WPW10114344 Whirlpool Drawer Glide
This Electric Range Front Drawer Glide supports the storage or boiler drawer of your appliance and allows the drawer to easily be opened and closed. The range drawer requires (2) glides; this black plastic replacement part is sold separately and can be used for either the left or right side. Note that the mounting screw is not included, but is available for purchase under item WP3400832. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Front Drawer Glide
• Tools Needed: Phillips-Head screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Front Drawer Glide
• Tools Needed: Phillips-Head screwdriver
Weight : 0.050300 lbs
Dimension : 3.346400 x 1.771600 x 1.181100
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Electric Range Front Drawer Glide supports the storage or boiler drawer of your appliance and allows the drawer to easily be opened and closed. The range drawer requires (2) glides; this black plastic replacement part is sold separately and can be used for either the left or right side. Note that the mounting screw is not included, but is available for purchase under item WP3400832. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Front Drawer Glide
• Tools Needed: Phillips-Head screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Front Drawer Glide
• Tools Needed: Phillips-Head screwdriver
Weight : 0.050300 lbs
Dimension : 3.346400 x 1.771600 x 1.181100
Write Your Own Review
The following parts are replaced by this product
- 9759785
- W10114344
Step 1: Before starting the repair, make sure to unplug the Whirlpool appliance from the wall and lay a towel over the workspace to protect the countertop.
Step 2: Begin by removing the drawer face frame from the refrigerator. Gently lift the glides up while pushing it towards the back of the unit. Remove the screws holding them in place and rotate them out.
Step 3: Next, remove the plastic tabs on the top and bottom of the drawers. You may need to use a flat head screwdriver to gently pry them off.
Step 4: With the tabs removed, you’ll be able to remove the old drawer glides. To do so, carefully lift the glide up and out of the tracks.
Step 5: Now, install the new WPW10114344 drawer glides. Make sure that the angled tab is facing the back of the drawer for proper installation. Push the glides into position and secure with the two plastic tabs.
Step 6: Lastly, reattach the drawer face frame using the mounting screws. Carefully align the face frame before tightening the screws.
With the repair complete, you can now re-plug the fridge, and you are ready to enjoy your new drawer glides!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Begin by removing the drawer face frame from the refrigerator. Gently lift the glides up while pushing it towards the back of the unit. Remove the screws holding them in place and rotate them out.
Step 3: Next, remove the plastic tabs on the top and bottom of the drawers. You may need to use a flat head screwdriver to gently pry them off.
Step 4: With the tabs removed, you’ll be able to remove the old drawer glides. To do so, carefully lift the glide up and out of the tracks.
Step 5: Now, install the new WPW10114344 drawer glides. Make sure that the angled tab is facing the back of the drawer for proper installation. Push the glides into position and secure with the two plastic tabs.
Step 6: Lastly, reattach the drawer face frame using the mounting screws. Carefully align the face frame before tightening the screws.
With the repair complete, you can now re-plug the fridge, and you are ready to enjoy your new drawer glides!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
