285748 Whirlpool Agitator Cam Kit
This Top Load Washer Agitator Cam Repair Kit should be used when the top part of the agitator is not moving properly but the bottom still functions correctly. This repair kit includes (4) agitator dogs, (1) cam, (1) bearing. Pre-assemble the repair kit before installing in the agitator. Make sure you install the dogs with the curve of the cam. We recommend using a small amount of grease (item 350849) with this kit if no grease is present on the old thrust washer. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Agitator Cam Repair Kit
• Tools Needed: Multi screwdriver, 7/16" socket
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Agitator Cam Repair Kit
• Tools Needed: Multi screwdriver, 7/16" socket
Weight : 0.2676 lbs
Dimension : 4.5669 x 2.874 x 2.8346
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Top Load Washer Agitator Cam Repair Kit should be used when the top part of the agitator is not moving properly but the bottom still functions correctly. This repair kit includes (4) agitator dogs, (1) cam, (1) bearing. Pre-assemble the repair kit before installing in the agitator. Make sure you install the dogs with the curve of the cam. We recommend using a small amount of grease (item 350849) with this kit if no grease is present on the old thrust washer. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Agitator Cam Repair Kit
• Tools Needed: Multi screwdriver, 7/16" socket
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Agitator Cam Repair Kit
• Tools Needed: Multi screwdriver, 7/16" socket
Weight : 0.2676 lbs
Dimension : 4.5669 x 2.874 x 2.8346
Write Your Own Review
The following parts are replaced by this product
- 3347085
- 3351000
- 3363662
DIY Instructions for Replacing the 285748 Whirlpool Agitator Cam Kit
Tools needed: Flathead and Philips head screwdrivers, pliers, and a replacement 285748 Whirlpool Agitator Cam Kit.
Step 1: Unplug the washer from the wall. Make sure it is completely disconnected from power.
Step 2: Turn off the water supply to the washer. You will need to locate the shut-off valve and turn it off before continuing.
Step 3: Remove the agitator cap. This is typically located on top of the agitator or in the center of the agitator. Gently use a flathead screwdriver to pry off the cap.
Step 4: Remove the screws that are securing the agitator to the outer tub. Use a Phillips head screwdriver to remove the screws and then set them aside.
Step 5: Slide the agitator off of the outer tub. Be careful not to damage the rubber seal.
Step 6: Locate the cam assembly, which is usually located near the bottom of the agitator.
Step 7: Use a pair of pliers to loosen and remove the retaining clip that holds the cam assembly.
Step 8: Disconnect the wiring from the cam assembly and then remove the old assembly.
Step 9: Install the new 285748 Whirlpool Agitator Cam Kit using the same technique used to remove the old cam assembly.
Step 10: Reconnect the wiring to the new assembly.
Step 11: Secure the cam assembly with the retaining clip and tighten with a pair of pliers.
Step 12: Slide the agitator back on to the outer tub and secure with the screws removed earlier.
Step 13: Finally, replace the agitator cap and make sure it is securely in place.
Step 14: Once all the steps are complete, plug the washer back into the wall and turn on the water supply. You should now have a properly functioning agitator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools needed: Flathead and Philips head screwdrivers, pliers, and a replacement 285748 Whirlpool Agitator Cam Kit.
Step 1: Unplug the washer from the wall. Make sure it is completely disconnected from power.
Step 2: Turn off the water supply to the washer. You will need to locate the shut-off valve and turn it off before continuing.
Step 3: Remove the agitator cap. This is typically located on top of the agitator or in the center of the agitator. Gently use a flathead screwdriver to pry off the cap.
Step 4: Remove the screws that are securing the agitator to the outer tub. Use a Phillips head screwdriver to remove the screws and then set them aside.
Step 5: Slide the agitator off of the outer tub. Be careful not to damage the rubber seal.
Step 6: Locate the cam assembly, which is usually located near the bottom of the agitator.
Step 7: Use a pair of pliers to loosen and remove the retaining clip that holds the cam assembly.
Step 8: Disconnect the wiring from the cam assembly and then remove the old assembly.
Step 9: Install the new 285748 Whirlpool Agitator Cam Kit using the same technique used to remove the old cam assembly.
Step 10: Reconnect the wiring to the new assembly.
Step 11: Secure the cam assembly with the retaining clip and tighten with a pair of pliers.
Step 12: Slide the agitator back on to the outer tub and secure with the screws removed earlier.
Step 13: Finally, replace the agitator cap and make sure it is securely in place.
Step 14: Once all the steps are complete, plug the washer back into the wall and turn on the water supply. You should now have a properly functioning agitator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
