WPW10304660 Whirlpool Wheel Assembly
Part #: WPL WPW10304660
Whirlpool WPW10304660 ROLLER-CABINET. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.1727 lbs
Dimension : 3.5 x 3 x 1.5
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WPW10304660 ROLLER-CABINET. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.1727 lbs
Dimension : 3.5 x 3 x 1.5
Write Your Own Review
The following parts are replaced by this product
- W10304660
DIY Steps to Replace the Whirlpool WPW10304660 ROLLER-CABINET
1. Unplug the refrigerator from the wall and move it away from the wall.
2. Remove all food items, shelves and drawers, and parts like the crisper bin, top shelf, and number pad. Place them on the counter or in a safe place.
3. Locate the roller-cabinet at the bottom of the refrigerator. It will typically be held in place by two or three screws.
4. Using a screwdriver, remove all screws and carefully pull the roller-cabinet out.
5. Install the new roller-cabinet, making sure that it is properly aligned and secure.
6. Re-attach the number pad, the top shelf, and the crisper bin if applicable.
7. Place the shelves, drawers, and any other parts inside the fridge.
8. Push the refrigerator back against the wall and plug it into the wall outlet.
9. Test the refrigerator to make sure it works correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator from the wall and move it away from the wall.
2. Remove all food items, shelves and drawers, and parts like the crisper bin, top shelf, and number pad. Place them on the counter or in a safe place.
3. Locate the roller-cabinet at the bottom of the refrigerator. It will typically be held in place by two or three screws.
4. Using a screwdriver, remove all screws and carefully pull the roller-cabinet out.
5. Install the new roller-cabinet, making sure that it is properly aligned and secure.
6. Re-attach the number pad, the top shelf, and the crisper bin if applicable.
7. Place the shelves, drawers, and any other parts inside the fridge.
8. Push the refrigerator back against the wall and plug it into the wall outlet.
9. Test the refrigerator to make sure it works correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.