WP8181747 Whirlpool Seal Assembly

How to Replace the Whirlpool WP8181747 Seal

Replacing a seal is a fairly simple process and can easily be done as a DIY project. The key to successfully replacing a seal is to ensure that all the components are properly fitted and secure, so that the appliance is able to operate safely and effectively. Follow these steps to replace the Whirlpool WP8181747 seal:

1. First, make sure the appliance is powered off and all components have cooled down.

2. Unscrew the backing panel screws on the back of the appliance, then remove the backing panel.

3. Locate the damaged seal and carefully remove it.

4. Thoroughly clean the area around the seal, using a soft cloth and warm, soapy water. Let it dry completely.

5. Next, place the new WP8181747 seal into the space where the old one used to be. Make sure it fits snugly and is properly secured in place.

6. Reattach the backing panel screws to secure the new seal.

7. Finally, turn the appliance back on and test it to ensure that the new seal is working properly.

By following these steps, you should be able to replace the Whirlpool WP8181747 seal with ease. However, if you are not comfortable doing the repair yourself, contact a professional for assistance.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.