W11429587 Whirlpool Catch
Whirlpool W11429587 CATCH We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0218 lbs
Dimension : 2.1259 x 1.811 x 0.7874
Whirlpool W11429587 CATCH We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0218 lbs
Dimension : 2.1259 x 1.811 x 0.7874
Write Your Own Review
1. Begin by gathering the necessary tools for the job, such as an Allen wrench, flat-head screwdriver, and a replacement Whirlpool W11429587 catch.
2. Inspect the refrigerator door for any screws or fasteners around the perimeter and remove them using the appropriate tool.
3. Once all the screws are loose, carefully lift off the outer panel of the refrigerator door and set it aside.
4. Look for the catch that holds the door closed and use an Allen wrench to loosen the screws that hold it in place.
5. Carefully lift out the old catch with a pair of needle-nose pliers.
6. Place the new Whirlpool W11429587 catch into the hole and align it with the mounting holes on the refrigerator door.
7. Secure the catch with the screws you removed earlier and tighten them with the Allen wrench.
8. Reattach the refrigerator door panel and fasten any screws or fasteners that you removed in step two.
9. Test the refrigerator door to ensure the door closes securely and the new Whirlpool W11429587 catch is working properly.
10. Replace any necessary parts and clean up the work area once the repair is complete.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Inspect the refrigerator door for any screws or fasteners around the perimeter and remove them using the appropriate tool.
3. Once all the screws are loose, carefully lift off the outer panel of the refrigerator door and set it aside.
4. Look for the catch that holds the door closed and use an Allen wrench to loosen the screws that hold it in place.
5. Carefully lift out the old catch with a pair of needle-nose pliers.
6. Place the new Whirlpool W11429587 catch into the hole and align it with the mounting holes on the refrigerator door.
7. Secure the catch with the screws you removed earlier and tighten them with the Allen wrench.
8. Reattach the refrigerator door panel and fasten any screws or fasteners that you removed in step two.
9. Test the refrigerator door to ensure the door closes securely and the new Whirlpool W11429587 catch is working properly.
10. Replace any necessary parts and clean up the work area once the repair is complete.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
