W11338583 Whirlpool Light Bulb
Part #: WPL W11338583
Whirlpool W11338583 BULB-LIGHT . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0072 lbs
Dimension : 0.111 x 0.111 x 0.111
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11338583 BULB-LIGHT . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0072 lbs
Dimension : 0.111 x 0.111 x 0.111
Write Your Own Review
The following parts are replaced by this product
- W10565137
- W10745744
- W10865849
- W11043014
Replacing the Whirlpool W11338583 BULB-LIGHT
1. Start by unplugging the refrigerator from its power source.
2. Open the refrigerator door and pull out the lower kickplate. This will reveal the bulb housing.
3. Using a Phillips head screwdriver, remove the screws that are holding the bulb housing in place.
4. Carefully pull out the bulb housing and disconnect the electrical wiring attached to it.
5. Remove the lightbulb from the housing. If necessary, use a pair of pliers to grip the base of the bulb and twist it gently to unscrew it.
6. Take the new bulb and insert it into the bulb housing. Make sure it is securely in place and that the wiring is connected correctly.
7. Reattach the bulb housing and use the Phillips head screwdriver to secure it back in place.
8. Replace the lower kickplate and plug the refrigerator back into its power source.
9. Turn the power back on and test the new bulb to ensure it is working properly.
You have successfully replaced the Whirlpool W11338583 BULB-LIGHT!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Start by unplugging the refrigerator from its power source.
2. Open the refrigerator door and pull out the lower kickplate. This will reveal the bulb housing.
3. Using a Phillips head screwdriver, remove the screws that are holding the bulb housing in place.
4. Carefully pull out the bulb housing and disconnect the electrical wiring attached to it.
5. Remove the lightbulb from the housing. If necessary, use a pair of pliers to grip the base of the bulb and twist it gently to unscrew it.
6. Take the new bulb and insert it into the bulb housing. Make sure it is securely in place and that the wiring is connected correctly.
7. Reattach the bulb housing and use the Phillips head screwdriver to secure it back in place.
8. Replace the lower kickplate and plug the refrigerator back into its power source.
9. Turn the power back on and test the new bulb to ensure it is working properly.
You have successfully replaced the Whirlpool W11338583 BULB-LIGHT!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.