WPW10327455 Whirlpool Spray Arm
This Dishwasher Spray Arm rotates and sprays water to clean the dishes inside the dishwasher tub. If it has been damaged, and is no longer connected to the pump, you may need to replace this part. To access the part, remove the lower rack out of the dishwasher and unscrew the old spray arm retainer counter clockwise to remove. Replacing these parts will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this kit. You must also turn off the water supply underneath the sink before installation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Spray Arm
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Spray Arm
• Tools Needed: Multi screwdriver
Weight : 0.1248 lbs
Dimension : 5.04 x 1.93 x 1.77
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dishwasher Spray Arm rotates and sprays water to clean the dishes inside the dishwasher tub. If it has been damaged, and is no longer connected to the pump, you may need to replace this part. To access the part, remove the lower rack out of the dishwasher and unscrew the old spray arm retainer counter clockwise to remove. Replacing these parts will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this kit. You must also turn off the water supply underneath the sink before installation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Spray Arm
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Spray Arm
• Tools Needed: Multi screwdriver
Weight : 0.1248 lbs
Dimension : 5.04 x 1.93 x 1.77
Write Your Own Review
The following parts are replaced by this product
- W10327455
Replacing the Whirlpool WPW10327455 Arm-Spray
DIY Instructions
1. Turn off the water supply to the faucet by closing the main water shutoff valve.
2. Unscrew the faucet handle and remove the old arm-spray.
3. Take the new Whirlpool WPW10327455 arm-spray and screw it in place.
4. Connect the spray head to the flexible hose by turning it clockwise until it is tight.
5. Turn on the water supply to check for any leaks. If there are any, tighten the connection until it stops leaking.
6. Once you have checked for any leaks, turn off the water supply and put the faucet handle back on.
By following these simple steps, you can easily replace your Whirlpool WPW10327455 arm-spray without professional help. Make sure to perform regular maintenance to the spray head to ensure that it works properly and lasts longer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. Turn off the water supply to the faucet by closing the main water shutoff valve.
2. Unscrew the faucet handle and remove the old arm-spray.
3. Take the new Whirlpool WPW10327455 arm-spray and screw it in place.
4. Connect the spray head to the flexible hose by turning it clockwise until it is tight.
5. Turn on the water supply to check for any leaks. If there are any, tighten the connection until it stops leaking.
6. Once you have checked for any leaks, turn off the water supply and put the faucet handle back on.
By following these simple steps, you can easily replace your Whirlpool WPW10327455 arm-spray without professional help. Make sure to perform regular maintenance to the spray head to ensure that it works properly and lasts longer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
