807048001 Frigidaire Dishwasher Check Valve
This Genuine OEM Frigidaire 807048001 FLAPPER is a replacement part for your Frigidaire dishwasher.We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0042 lbs
Dimension : 1.3385 x 1.0236 x 0.433
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Genuine OEM Frigidaire 807048001 FLAPPER is a replacement part for your Frigidaire dishwasher.We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0042 lbs
Dimension : 1.3385 x 1.0236 x 0.433
Write Your Own Review
The following parts are replaced by this product
- 154617301
DIY Guide to Replacing a Frigidaire 807048001 FLAPPER
Replacing a Frigidaire 807048001 FLAPPER is a simple do-it-yourself (DIY) project that can be done in just a few steps. This guide will provide you with all the necessary information and steps to replace a Frigidaire 807048001 FLAPPER in your home.
Tools Needed:
-Adjustable wrench
-Screwdriver
-Pliers
-Sponge
-Bucket
-New Frigidaire 807048001 FLAPPER
Instructions:
1. Start by turning off the water supply to the toilet. This can be done by turning the shutoff valve located near the base of the toilet or at the wall behind the toilet.
2. Flush the toilet and use a sponge and bucket to catch any remaining water.
3. Unscrew the bolts on the old Frigidaire 807048001 FLAPPER using an adjustable wrench.
4. Remove the old flapper from the toilet and discard.
5. Install the new Frigidaire 807048001 FLAPPER and secure it with the screws provided.
6. Turn the water supply back on and flush the toilet to test the new flapper.
7. Test for leaks around the base of the toilet. If a leak is detected, tighten the screws around the flapper.
Once you have completed these steps, you have successfully replaced your Frigidaire 807048001 FLAPPER. Make sure to check the flapper regularly to ensure it is in good working order.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a Frigidaire 807048001 FLAPPER is a simple do-it-yourself (DIY) project that can be done in just a few steps. This guide will provide you with all the necessary information and steps to replace a Frigidaire 807048001 FLAPPER in your home.
Tools Needed:
-Adjustable wrench
-Screwdriver
-Pliers
-Sponge
-Bucket
-New Frigidaire 807048001 FLAPPER
Instructions:
1. Start by turning off the water supply to the toilet. This can be done by turning the shutoff valve located near the base of the toilet or at the wall behind the toilet.
2. Flush the toilet and use a sponge and bucket to catch any remaining water.
3. Unscrew the bolts on the old Frigidaire 807048001 FLAPPER using an adjustable wrench.
4. Remove the old flapper from the toilet and discard.
5. Install the new Frigidaire 807048001 FLAPPER and secure it with the screws provided.
6. Turn the water supply back on and flush the toilet to test the new flapper.
7. Test for leaks around the base of the toilet. If a leak is detected, tighten the screws around the flapper.
Once you have completed these steps, you have successfully replaced your Frigidaire 807048001 FLAPPER. Make sure to check the flapper regularly to ensure it is in good working order.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
