D512108 Speed Queen Light Housing Assembly 120V
D512108 Speed Queen Light Housing Assembly 120V
Weight : 0.000000 lbs
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
D512108 Speed Queen Light Housing Assembly 120V
Weight : 0.000000 lbs
Write Your Own Review
The following parts are replaced by this product
- 504452
- 504452
- 512108
How to Replace the Speed Queen D512108 ASSY LIGHT HOUSING 120V
1. Make sure the power to the washer is off and unplugged from the wall socket.
2. Carefully remove the light cover from the rear of the washer.
3. Unscrew the mounting screws that hold the old lighting housing in place.
4. Pull out the old light housing and disconnect its power cable.
5. Place the new Speed Queen D512108 ASSY LIGHT HOUSING 120V in the same position as the old one.
6. Screw the mounting screws back into the housing.
7. Connect the power cable to the new light housing.
8. Put the light cover back on the washer.
9. Power up the washer and test the new light housing.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Make sure the power to the washer is off and unplugged from the wall socket.
2. Carefully remove the light cover from the rear of the washer.
3. Unscrew the mounting screws that hold the old lighting housing in place.
4. Pull out the old light housing and disconnect its power cable.
5. Place the new Speed Queen D512108 ASSY LIGHT HOUSING 120V in the same position as the old one.
6. Screw the mounting screws back into the housing.
7. Connect the power cable to the new light housing.
8. Put the light cover back on the washer.
9. Power up the washer and test the new light housing.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
