WB13K21 GE Oven Ignitor 3 3/4 7Leads
GE General Electric Hotpoint Sears Kenmore Gas Range Oven Igniter WB13K21
● 1-1/2 in Ceramic.
● Flat
● May need to cut off plug and use wire connectors provided
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
● 1-1/2 in Ceramic.
● Flat
● May need to cut off plug and use wire connectors provided
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.9159 lbs
Dimension : 11.1 x 3.7 x 3.1
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
GE General Electric Hotpoint Sears Kenmore Gas Range Oven Igniter WB13K21
● 1-1/2 in Ceramic.
● Flat
● May need to cut off plug and use wire connectors provided
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
● 1-1/2 in Ceramic.
● Flat
● May need to cut off plug and use wire connectors provided
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.9159 lbs
Dimension : 11.1 x 3.7 x 3.1
Write Your Own Review
The following parts are replaced by this product
- WB13K0012
- WB13K0014
- WB13K0013
- WB13K0021
Replacing the WB13K21 GE Oven Ignitor
1. Start by disconnecting the power to the oven by unplugging it. If your unit is hard-wired, turn off the breaker before conducting maintenance.
2. Remove the oven racks and anything else inside the oven.
3. Open the oven door and locate the ignitor near the bottom of the oven on the back wall.
4. Remove the screws that are holding the ignitor in place.
5. Take the ignitor out and inspect for damage or corrosion. If either is present, replace the ignitor.
6. To install the new ignitor, position it in the same place as the old one and secure it with the screws you removed.
7. Plug in the oven or switch the breaker back on.
8. Test the ignitor, setting the oven to broil and pressing the start button. The new ignitor should warm up and glow bright orange within a few minutes. If it doesn't, check the connections and try again.
9. Replace the oven racks and any other items you removed, and you're done.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Start by disconnecting the power to the oven by unplugging it. If your unit is hard-wired, turn off the breaker before conducting maintenance.
2. Remove the oven racks and anything else inside the oven.
3. Open the oven door and locate the ignitor near the bottom of the oven on the back wall.
4. Remove the screws that are holding the ignitor in place.
5. Take the ignitor out and inspect for damage or corrosion. If either is present, replace the ignitor.
6. To install the new ignitor, position it in the same place as the old one and secure it with the screws you removed.
7. Plug in the oven or switch the breaker back on.
8. Test the ignitor, setting the oven to broil and pressing the start button. The new ignitor should warm up and glow bright orange within a few minutes. If it doesn't, check the connections and try again.
9. Replace the oven racks and any other items you removed, and you're done.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
