WPW10588165 Whirlpool Adjuster Housing
The Dishwasher Dishrack Adjuster Housing attaches the dishrack adjuster and the wheel assembly to the dishrack. This part is for the right side adjuster. To install, disassemble the current adjuster and use existing parts. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Adjuster Housing, Right
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Adjuster Housing, Right
• No tools required for installation
Weight : 0.2794 lbs
Dimension : 4.5669 x 3.8582 x 2.2047
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dishwasher Dishrack Adjuster Housing attaches the dishrack adjuster and the wheel assembly to the dishrack. This part is for the right side adjuster. To install, disassemble the current adjuster and use existing parts. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Adjuster Housing, Right
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Adjuster Housing, Right
• No tools required for installation
Weight : 0.2794 lbs
Dimension : 4.5669 x 3.8582 x 2.2047
Write Your Own Review
The following parts are replaced by this product
- W10320665
- W10588165
- WPW10320665
- W10418316
DIY Guide to Replacing Whirlpool Adjuster Housing (WPW10588165)
Replacing the adjuster housing on your Whirlpool fridge is an easy task for most DIYers. This guide will walk you through the process step-by-step to help ensure a successful repair.
Materials Required:
-Phillips Head Screwdriver
-Adjuster Housing (WPW10588165)
-Sharp Utility Knife
Step 1: Unplug the refrigerator from power source.
Step 2: Find the adjuster housing located at the bottom of the door.
Step 3: Using a Phillips head screwdriver, remove the screws that hold the adjuster housing in place.
Step 4: Gently remove the old adjuster housing, making sure to keep any screws or pieces of the old housing in tact.
Step 5: Take the new adjuster housing (WPW10588165) and align it with the mounting holes on the door.
Step 6: Secure the new adjuster housing with the screws removed earlier.
Step 7: Using a sharp utility knife, cut away any excess plastic that may be preventing the adjuster housing from seating properly.
Step 8: Once the new adjuster housing is installed and secured, turn the refrigerator back on and test it out.
Replacing the Whirlpool adjuster housing (WPW10588165) is a simple, easy task that can be completed by most DIYers. With this guide, you should now have the knowledge and information needed to replace the adjuster housing and get your refrigerator up and running again in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the adjuster housing on your Whirlpool fridge is an easy task for most DIYers. This guide will walk you through the process step-by-step to help ensure a successful repair.
Materials Required:
-Phillips Head Screwdriver
-Adjuster Housing (WPW10588165)
-Sharp Utility Knife
Step 1: Unplug the refrigerator from power source.
Step 2: Find the adjuster housing located at the bottom of the door.
Step 3: Using a Phillips head screwdriver, remove the screws that hold the adjuster housing in place.
Step 4: Gently remove the old adjuster housing, making sure to keep any screws or pieces of the old housing in tact.
Step 5: Take the new adjuster housing (WPW10588165) and align it with the mounting holes on the door.
Step 6: Secure the new adjuster housing with the screws removed earlier.
Step 7: Using a sharp utility knife, cut away any excess plastic that may be preventing the adjuster housing from seating properly.
Step 8: Once the new adjuster housing is installed and secured, turn the refrigerator back on and test it out.
Replacing the Whirlpool adjuster housing (WPW10588165) is a simple, easy task that can be completed by most DIYers. With this guide, you should now have the knowledge and information needed to replace the adjuster housing and get your refrigerator up and running again in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
