WPW10434452 Whirlpool Burner Control Switch
The Electric Range Surface Burner Control Switch is a replacement part that operates the appliance’s surface element, turning it off and on and regulating the heat intensity. If your element remains at high heat or doesn’t turn on at all, the surface element switch (also called the infinite switch) may be damaged and need replacement. Installing this part will require basic hand tools, minor disassembly of the range and novice repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this item. Helpful Tip: Taking a digital photograph of the current wiring connections before replacing this part is advisable to aid with proper installation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Surface Burner Control Switch
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Surface Burner Control Switch
• Tools Needed: Multi screwdriver
Weight : 0.0576 lbs
Dimension : 1.75 x 1.75 x 1.5
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Electric Range Surface Burner Control Switch is a replacement part that operates the appliance’s surface element, turning it off and on and regulating the heat intensity. If your element remains at high heat or doesn’t turn on at all, the surface element switch (also called the infinite switch) may be damaged and need replacement. Installing this part will require basic hand tools, minor disassembly of the range and novice repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this item. Helpful Tip: Taking a digital photograph of the current wiring connections before replacing this part is advisable to aid with proper installation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Surface Burner Control Switch
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Surface Burner Control Switch
• Tools Needed: Multi screwdriver
Weight : 0.0576 lbs
Dimension : 1.75 x 1.75 x 1.5
Write Your Own Review
The following parts are replaced by this product
- W10434452
DIY Guide to Replacing the WPW10434452 Whirlpool Burner Control Switch
When your range’s burner switch breaks, it can be a huge hassle. Fortunately, many cooking range parts are easy to replace and can be done with a DIY approach. Replacing the WPW10434452 Whirlpool Burner Control Switch is a relatively simple process that can be done in minutes with a few basic tools.
Here’s what you will need:
- Phillips screwdriver
- Flathead screwdriver
- WPW10434452 Whirlpool Burner Control Switch (can be purchased online)
Step 1: Unplug your range from the power source. This is an important safety precaution when performing any DIY repairs.
Step 2: Remove the screws from the back panel of the range. Use a Phillips screwdriver to remove the screws.
Step 3: Lift off the back panel and locate the faulty burner control switch. Make sure to take note of where each wire is connected so you can reconnect them easily at the end.
Step 4: Disconnect the wires connected to the burner control switch. Use a flathead screwdriver to gently disconnect the wires one at a time.
Step 5: Remove the switch itself. This should be easy because it is only held in place by the screws that you just removed.
Step 6: Put the new burner control switch into place and reconnect the wires. Make sure the wires are connected properly and securely before proceeding.
Step 7: Replace the back panel and screws to secure it in position.
Step 8: Plug your range back in to the power source and test out your new burner control switch. If it is working properly, then congratulations! You have successfully replaced the WPW10434452 Whirlpool Burner Control Switch!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
When your range’s burner switch breaks, it can be a huge hassle. Fortunately, many cooking range parts are easy to replace and can be done with a DIY approach. Replacing the WPW10434452 Whirlpool Burner Control Switch is a relatively simple process that can be done in minutes with a few basic tools.
Here’s what you will need:
- Phillips screwdriver
- Flathead screwdriver
- WPW10434452 Whirlpool Burner Control Switch (can be purchased online)
Step 1: Unplug your range from the power source. This is an important safety precaution when performing any DIY repairs.
Step 2: Remove the screws from the back panel of the range. Use a Phillips screwdriver to remove the screws.
Step 3: Lift off the back panel and locate the faulty burner control switch. Make sure to take note of where each wire is connected so you can reconnect them easily at the end.
Step 4: Disconnect the wires connected to the burner control switch. Use a flathead screwdriver to gently disconnect the wires one at a time.
Step 5: Remove the switch itself. This should be easy because it is only held in place by the screws that you just removed.
Step 6: Put the new burner control switch into place and reconnect the wires. Make sure the wires are connected properly and securely before proceeding.
Step 7: Replace the back panel and screws to secure it in position.
Step 8: Plug your range back in to the power source and test out your new burner control switch. If it is working properly, then congratulations! You have successfully replaced the WPW10434452 Whirlpool Burner Control Switch!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
