WR72X241 GE Refrigerator Left Hand Crisper Drawer Slide Rail Assembly

DIY Guide to Replacing the Left Hand Slide Rail Assembly on the WR72X241 GE Refrigerator

To replace the left-hand slide rail assembly on a WR72X241 GE refrigerator, you will first need to gather the following supplies:

- Phillips Head Screwdriver
- Flathead Screwdriver
- New Slide Rail Assembly

Now you're ready to complete the following steps:

1. Start by unplugging your GE refrigerator from the electrical outlet.

2. Using a Phillips head screwdriver, remove the screws on the bottom of the crisper drawer frame.

3. Carefully remove the frame and slide out the entire slide rail assembly.

4. Now unsnap and detach the old left-hand slide rail assembly from the frame.

5. Take the new slide rail assembly and attach it firmly to the frame.

6. Insert the slide rail assembly back into the frame and use a flathead screwdriver to lock it into position.

7. Replace the screws on the frame and then plug the refrigerator back into the electrical outlet.

You have now successfully replaced the left-hand slide rail assembly on your WR72X241 GE Refrigerator.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.