WP8558307 Whirlpool Rinse Aid Dispenser Cap
The Dishwasher Rinse Aid Cap is part of the detergent dispenser and releases the appliance’s rinse aid during the cleaning cycle. If the detergent assembly of your dishwasher does not dispense the rinse aid properly or your appliance’s current dispenser cap is broken or lost, you can easily replace it with this item. This part measures approximately 1-1/2" D and is blue in color. Note that if your original cap was larger in diameter than this item, you will need to replace the entire dispenser assembly. Installing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rinse Aid Cap
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rinse Aid Cap
• No tools required for installation
Weight : 0.0072 lbs
Dimension : 1.37 x 1.37 x 0.87
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dishwasher Rinse Aid Cap is part of the detergent dispenser and releases the appliance’s rinse aid during the cleaning cycle. If the detergent assembly of your dishwasher does not dispense the rinse aid properly or your appliance’s current dispenser cap is broken or lost, you can easily replace it with this item. This part measures approximately 1-1/2" D and is blue in color. Note that if your original cap was larger in diameter than this item, you will need to replace the entire dispenser assembly. Installing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rinse Aid Cap
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Rinse Aid Cap
• No tools required for installation
Weight : 0.0072 lbs
Dimension : 1.37 x 1.37 x 0.87
Write Your Own Review
The following parts are replaced by this product
- 8539095
- 8193984
- 8558307
Replacing the WP8558307 Whirlpool Dispenser Cap
1. Unplug the refrigerator from the power source. To prevent electric shock, it is essential that the refrigerator be unplugged before beginning any maintenance or service.
2. Locate the dispenser cap. It should be located on top of the dispenser door.
3. Using a Phillips head screwdriver, carefully remove the screws that are holding the cap to the dispenser.
4. Lift the dispenser cap off of the dispenser door and set it aside.
5. Take the new WP8558307 Whirlpool dispenser cap and place it in the same location as the old one.
6. Secure the dispenser cap with the Phillips head screws you removed earlier.
7. Plug the refrigerator back into the power source.
8. Test the new dispenser cap by pressing down on it gently. Make sure the water begins to flow when you press down on it. If it does not, check the connections and make sure they are secure.
9. Once everything is working properly, your new WP8558307 Whirlpool Dispenser Cap is successfully installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator from the power source. To prevent electric shock, it is essential that the refrigerator be unplugged before beginning any maintenance or service.
2. Locate the dispenser cap. It should be located on top of the dispenser door.
3. Using a Phillips head screwdriver, carefully remove the screws that are holding the cap to the dispenser.
4. Lift the dispenser cap off of the dispenser door and set it aside.
5. Take the new WP8558307 Whirlpool dispenser cap and place it in the same location as the old one.
6. Secure the dispenser cap with the Phillips head screws you removed earlier.
7. Plug the refrigerator back into the power source.
8. Test the new dispenser cap by pressing down on it gently. Make sure the water begins to flow when you press down on it. If it does not, check the connections and make sure they are secure.
9. Once everything is working properly, your new WP8558307 Whirlpool Dispenser Cap is successfully installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
