WP3400918 Whirlpool Fastener
This Dishwasher Upper Spray Arm Retaining Clip is what holds the upper spray arm on. If your dishwasher's spray arm is no longer secure, replacing this part may alleviate the issue. Pull the upper rack out halfway to access the part. Replacing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this kit. You must also turn off the water supply underneath the sink before installation. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Upper Spray Arm Retaining Clip
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Upper Spray Arm Retaining Clip
• Tools Needed: Multi screwdriver
Weight : 0.0041 lbs
Dimension : 1.1811 x 0.9448 x 0.5118
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dishwasher Upper Spray Arm Retaining Clip is what holds the upper spray arm on. If your dishwasher's spray arm is no longer secure, replacing this part may alleviate the issue. Pull the upper rack out halfway to access the part. Replacing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this kit. You must also turn off the water supply underneath the sink before installation. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Upper Spray Arm Retaining Clip
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Upper Spray Arm Retaining Clip
• Tools Needed: Multi screwdriver
Weight : 0.0041 lbs
Dimension : 1.1811 x 0.9448 x 0.5118
Write Your Own Review
The following parts are replaced by this product
- 3400922
- 3400918
DIY: How to Replace a Whirlpool WP3400918 Retainer
Step 1: Gather the necessary materials. You will need a Phillips head screwdriver, a small flathead screwdriver, and the new WP3400918 retainer.
Step 2: Unplug the appliance. Before you begin your repair, always unplug the appliance from the wall socket to prevent any electrical shock or damage.
Step 3: Remove the mounting screws. There may be 4-5 screws located on the bottom of the appliance that hold the retainer in place. Use your Phillips head screwdriver to remove them.
Step 4: Carefully pull the retainer out from beneath the appliance. If it’s stuck, use a small flathead screwdriver to gently pry it loose.
Step 5: Insert the new retainer. Make sure the four sides are aligned properly, then press it into place at the four corners.
Step 6: Replace the mounting screws. Secure the retainer with the screws you removed in Step 3.
Step 7: Plug the appliance back in. Once you’ve replaced the retainer, turn the power back on to make sure everything is functioning properly.
You’ve successfully replaced the Whirlpool WP3400918 retainer!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 1: Gather the necessary materials. You will need a Phillips head screwdriver, a small flathead screwdriver, and the new WP3400918 retainer.
Step 2: Unplug the appliance. Before you begin your repair, always unplug the appliance from the wall socket to prevent any electrical shock or damage.
Step 3: Remove the mounting screws. There may be 4-5 screws located on the bottom of the appliance that hold the retainer in place. Use your Phillips head screwdriver to remove them.
Step 4: Carefully pull the retainer out from beneath the appliance. If it’s stuck, use a small flathead screwdriver to gently pry it loose.
Step 5: Insert the new retainer. Make sure the four sides are aligned properly, then press it into place at the four corners.
Step 6: Replace the mounting screws. Secure the retainer with the screws you removed in Step 3.
Step 7: Plug the appliance back in. Once you’ve replaced the retainer, turn the power back on to make sure everything is functioning properly.
You’ve successfully replaced the Whirlpool WP3400918 retainer!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
