W11334745 Whirlpool Refrigerator Evaporator Fan Motor
W11334745 is an original equipment manufactured (OEM) part. Enhance the efficiency of your refrigerator with the W11334745 evaporator fan motor, designed specifically for Whirlpool appliances and compatible with various brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. This reliable part plays a crucial role in circulating cool air throughout the appliance, maintaining optimal temperatures and preserving your food's freshness. Built to meet high quality and performance standards, this motor ensures a seamless fit and easy installation, making it an ideal choice for DIY repairs. Restore your refrigerator's cooling efficiency today with this essential component, guaranteeing years of dependable service and peace of mind.
Weight : 0.732100 lbs
Dimension : 5.433000 x 4.488100 x 4.173200
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
W11334745 is an original equipment manufactured (OEM) part. Enhance the efficiency of your refrigerator with the W11334745 evaporator fan motor, designed specifically for Whirlpool appliances and compatible with various brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. This reliable part plays a crucial role in circulating cool air throughout the appliance, maintaining optimal temperatures and preserving your food's freshness. Built to meet high quality and performance standards, this motor ensures a seamless fit and easy installation, making it an ideal choice for DIY repairs. Restore your refrigerator's cooling efficiency today with this essential component, guaranteeing years of dependable service and peace of mind.
Weight : 0.732100 lbs
Dimension : 5.433000 x 4.488100 x 4.173200
Write Your Own Review
The following parts are replaced by this product
- W10276647
- WPW10276647
Replacing the Whirlpool W11334745 Motor-EVAP
1. Unplug the appliance from the power supply and shut off the water if you haven't done so already.
2. Locate the Motor-Evap, which is usually housed behind the refrigerator's evaporator cover panel.
3. Remove the mounting screws that are holding the panel in place with a screwdriver.
4. Gently pull the evaporator cover panel away from the back of the refrigerator, being careful not to tear the insulation or disturb any electrical connections.
5. Disconnect the wiring harnesses attached to the Motor-Evap.
6. Unscrew the mounting screws located on either side of the Motor-Evap, using a screwdriver.
7. Lift the Motor-Evap out of the refrigerator and discard it.
8. Insert the new Motor-Evap into the space vacated by the old unit and secure with the mounting screws.
9. Reconnect the wiring harnesses to the new Motor-Evap.
10. Place the evaporator cover panel back into place, making sure to slide the insulation back in correctly, and secure it with the mounting screws.
11. Restore power to the fridge and turn the water back on.
12. Test the motor-evap operations to ensure that it is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the appliance from the power supply and shut off the water if you haven't done so already.
2. Locate the Motor-Evap, which is usually housed behind the refrigerator's evaporator cover panel.
3. Remove the mounting screws that are holding the panel in place with a screwdriver.
4. Gently pull the evaporator cover panel away from the back of the refrigerator, being careful not to tear the insulation or disturb any electrical connections.
5. Disconnect the wiring harnesses attached to the Motor-Evap.
6. Unscrew the mounting screws located on either side of the Motor-Evap, using a screwdriver.
7. Lift the Motor-Evap out of the refrigerator and discard it.
8. Insert the new Motor-Evap into the space vacated by the old unit and secure with the mounting screws.
9. Reconnect the wiring harnesses to the new Motor-Evap.
10. Place the evaporator cover panel back into place, making sure to slide the insulation back in correctly, and secure it with the mounting screws.
11. Restore power to the fridge and turn the water back on.
12. Test the motor-evap operations to ensure that it is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
