W11194438 Whirlpool Water Filter Housing
Whirlpool W11194438 HOUSING We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.7513 lbs
Dimension : 6.4173 x 4.9212 x 3.307
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11194438 HOUSING We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.7513 lbs
Dimension : 6.4173 x 4.9212 x 3.307
Write Your Own Review
The following parts are replaced by this product
- W10238156
- WPW10238156
DIY Instructions for Replacing the Whirlpool W11194438 HOUSING
Replacing the Whirlpool W11194438 housing is a fairly straightforward process that anyone with basic DIY skills can do. To replace the housing, you will need a few basic tools—a screwdriver, putty knife, and needle-nose pliers. Here are the steps you should follow to replace the housing:
1. Unplug the appliance from the wall outlet. Then move the appliance away from the wall to allow easy access.
2. Use a screwdriver to remove the screws that secure the housing in place.
3. With the screws removed, carefully pull out the old housing.
4. Use a putty knife to scrape away any remaining debris from the area where the housing was.
5. Install the new housing by lining up the holes and securing it with the screws.
6. Plug the appliance back into the wall outlet.
7. Test the appliance to make sure the housing has been installed correctly.
With these simple steps, you should be able to easily replace the Whirlpool W11194438 housing. If you are unsure about any of the steps mentioned above, it is best to consult a professional for help.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool W11194438 housing is a fairly straightforward process that anyone with basic DIY skills can do. To replace the housing, you will need a few basic tools—a screwdriver, putty knife, and needle-nose pliers. Here are the steps you should follow to replace the housing:
1. Unplug the appliance from the wall outlet. Then move the appliance away from the wall to allow easy access.
2. Use a screwdriver to remove the screws that secure the housing in place.
3. With the screws removed, carefully pull out the old housing.
4. Use a putty knife to scrape away any remaining debris from the area where the housing was.
5. Install the new housing by lining up the holes and securing it with the screws.
6. Plug the appliance back into the wall outlet.
7. Test the appliance to make sure the housing has been installed correctly.
With these simple steps, you should be able to easily replace the Whirlpool W11194438 housing. If you are unsure about any of the steps mentioned above, it is best to consult a professional for help.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
