240328203 Frigidaire Refrigerator Door Hinge Bearing

DIY Instructions on Replacing the 240328203 Frigidaire Refrigerator Door Hinge Bearing

Are you experiencing issues with your Frigidaire refrigerator door hinge bearing? If the door isn't closing properly, it might be time to replace the 240328203 Frigidaire Refrigerator Door Hinge Bearing! Follow these easy steps for a successful DIY repair.

Things You’ll Need:

• Phillips screwdriver

• Replacement 240328203 Frigidaire Refrigerator Door Hinge Bearing

• Socket set

Instructions:

1. Begin by unplugging your refrigerator and move it away from the wall.

2. Remove the screws from the top of the door hinge using a Phillips screwdriver.

3. Lift the door off of the bottom hinge pin and set aside.

4. Use a socket set to remove the screws that hold the hinge bearing in place.

5. Pull out the old 240328203 Frigidaire Refrigerator Door Hinge Bearing and replace with your new part.

6. Secure the new bearing in place with the screws you removed earlier.

7. Reattach the door to the bottom hinge pin and then re-secure the top hinge with screws.

8. Make sure the door is closing properly, then plug your refrigerator back in and slide it back into place.

You have now successfully replaced the 240328203 Frigidaire refrigerator door hinge bearing! Congratulations on a job well done and enjoy the improved performance of your refrigerator door.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.