WPW10324262 Whirlpool Oven Ignitor
The Gas Range Bake Igniter supplies the gas to light bake burner inside your appliance’s oven. This part is designed to be used with gas ovens that have a Direct Spark Ignition (DSI). You may need this replacement part if the element itself shorted out, or if the igniter of your oven glows for more than 90 seconds without lighting the gas flame – this indicates that the igniter is too weak to properly open the valve to allow the gas to feed through. The igniter must glow white hot to properly light the oven; if it glows red or orange it is not functioning correctly. Replacing this assembly will require basic hand tools, some disassembly of the gas range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure to turn the gas valve off before the repair.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Range Bake Igniter
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Range Bake Igniter
• Tools Needed: Multi screwdriver
Weight : 0.7678 lbs
Dimension : 5.55 x 4.45 x 4.29
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Gas Range Bake Igniter supplies the gas to light bake burner inside your appliance’s oven. This part is designed to be used with gas ovens that have a Direct Spark Ignition (DSI). You may need this replacement part if the element itself shorted out, or if the igniter of your oven glows for more than 90 seconds without lighting the gas flame – this indicates that the igniter is too weak to properly open the valve to allow the gas to feed through. The igniter must glow white hot to properly light the oven; if it glows red or orange it is not functioning correctly. Replacing this assembly will require basic hand tools, some disassembly of the gas range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure to turn the gas valve off before the repair.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Range Bake Igniter
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Range Bake Igniter
• Tools Needed: Multi screwdriver
Weight : 0.7678 lbs
Dimension : 5.55 x 4.45 x 4.29
Write Your Own Review
The following parts are replaced by this product
- W10324262
Replacing the Whirlpool WPW10324262 IGNTR-OVEN
Tools Needed:
- Phillips head screwdriver
- Flathead screwdriver
- Pliers
- New Whirlpool WPW10324262 IGNTR-OVEN
Instructions:
1. Unplug the oven from its power source. If the oven is hardwired, switch off the circuit breaker or remove the fuse to deactivate the power.
2. Remove the screws that secure the oven control panel and set aside.
3. Locate the existing Whirlpool WPW10324262 IGNTR-OVEN and use a flathead screwdriver to unfasten the mounting screws.
4. Pull out the oven igniter and disconnect the wires from the terminals.
5. Take your new Whirlpool WPW10324262 IGNTR-OVEN and connect the wires to their corresponding terminals. Secure the wires using pliers.
6. Reinstall the new oven igniter with the mounting screws, then set the control panel back in place and secure it with the screws.
7. Plug the oven back in to its power source or switch on the circuit breaker or fuse.
8. Test the new igniter by using the oven to test it properly.
That's it! You have successfully replaced the Whirlpool WPW10324262 IGNTR-OVEN.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
- Phillips head screwdriver
- Flathead screwdriver
- Pliers
- New Whirlpool WPW10324262 IGNTR-OVEN
Instructions:
1. Unplug the oven from its power source. If the oven is hardwired, switch off the circuit breaker or remove the fuse to deactivate the power.
2. Remove the screws that secure the oven control panel and set aside.
3. Locate the existing Whirlpool WPW10324262 IGNTR-OVEN and use a flathead screwdriver to unfasten the mounting screws.
4. Pull out the oven igniter and disconnect the wires from the terminals.
5. Take your new Whirlpool WPW10324262 IGNTR-OVEN and connect the wires to their corresponding terminals. Secure the wires using pliers.
6. Reinstall the new oven igniter with the mounting screws, then set the control panel back in place and secure it with the screws.
7. Plug the oven back in to its power source or switch on the circuit breaker or fuse.
8. Test the new igniter by using the oven to test it properly.
That's it! You have successfully replaced the Whirlpool WPW10324262 IGNTR-OVEN.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
