WP37001132 Whirlpool Felt Seal
Maytag Whirlpool Magic Chef KitchenAid Roper Norge Sears Kenmore Admiral Amana Clothes Dryer TUMBLER CYLINDER DRUM FELT SEAL 37001132
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Weight : 1.311500 lbs
Dimension : 9.685000 x 7.244000 x 2.598400
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Maytag Whirlpool Magic Chef KitchenAid Roper Norge Sears Kenmore Admiral Amana Clothes Dryer TUMBLER CYLINDER DRUM FELT SEAL 37001132
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Weight : 1.311500 lbs
Dimension : 9.685000 x 7.244000 x 2.598400
Write Your Own Review
The following parts are replaced by this product
- 501801
- 501801
- 37001132
Replacing the Whirlpool WP37001132 SEAL- CYLI
1. Unplug the power cord of your appliance and turn off the water supply to the appliance.
2. Carefully remove any remaiing items from inside your appliance.
3. Locate the old seal- cyli. It is usually a large circle at the back of your appliance near the gasket.
4. Use a screwdriver to remove the screws that secure the old seal- cyli in place.
5. Clean the surface of the old seal- cyli with a damp cloth.
6. Take your new Whirlpool WP37001132 seal- cyli and place it on the appliance so that it seals properly.
7. Use a screwdriver to secure the new seal- cyli in place with the screws you removed earlier.
8. Reconnect the water supply and power cord to the appliance.
9. Test your appliance to see if the new seal- cyli is working properly.
Congratulations, you have now successfully replaced the Whirlpool WP37001132 seal- cyli!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the power cord of your appliance and turn off the water supply to the appliance.
2. Carefully remove any remaiing items from inside your appliance.
3. Locate the old seal- cyli. It is usually a large circle at the back of your appliance near the gasket.
4. Use a screwdriver to remove the screws that secure the old seal- cyli in place.
5. Clean the surface of the old seal- cyli with a damp cloth.
6. Take your new Whirlpool WP37001132 seal- cyli and place it on the appliance so that it seals properly.
7. Use a screwdriver to secure the new seal- cyli in place with the screws you removed earlier.
8. Reconnect the water supply and power cord to the appliance.
9. Test your appliance to see if the new seal- cyli is working properly.
Congratulations, you have now successfully replaced the Whirlpool WP37001132 seal- cyli!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
