W11185686 Whirlpool Ice Bucket Assembly

DIY Instructions for Replacing the Whirlpool W11185686 ICE-CONTNR

1. Unplug your refrigerator or turn off the circuit breaker before you begin.

2. Remove the old ice container from the refrigerator by releasing the four clips on either side of the container.

3. Carefully lift the container out, being careful not to spill any of the water inside.

4. Drain the remaining water from the container into a sink or bucket.

5. Slide the new Whirlpool W11185686 ICE-Container into place.

6. Secure it with the four clips on either side.

7. Plug your refrigerator back in or turn the circuit breaker back on.

8. Test the new ice container to make sure that it is working properly and that no water is leaking.

9. Enjoy your new ice container.

By following these simple steps, you can easily replace your Whirlpool W11185686 ICE-Container and have better tasting ice and cold food!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.