240599301 Frigidaire Refrigerator Crisper Drawer Frame Cover
Part #: WCI 240599301
240599301 Frigidaire Refrigerator Crisper Drawer Frame Cover
Weight : 3.820200 lbs
Dimension : 20.669200 x 16.732200 x 1.535400
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
240599301 Frigidaire Refrigerator Crisper Drawer Frame Cover
Weight : 3.820200 lbs
Dimension : 20.669200 x 16.732200 x 1.535400
Write Your Own Review
The following parts are replaced by this product
- 240599302
DIY Instructions for Replacing the 240599301 Refrigerator Crisper Drawer Frame Cover
Step By Step Guide:
#1: Unplug your refrigerator's power cord and shut off the water supply line if necessary.
#2: Remove the crisper drawer by pulling it halfway out and lifting it up and away from the crisper drawer frame.
#3: Locate the two screws that secure the 240599301 crisper drawer frame cover in place. Using a Phillips screwdriver, remove these two screws and set them aside.
#4: Pull the old crisper drawer cover out of the crisper drawer frame.
#5: Place the new 240599301 crisper drawer frame cover in the frame, and make sure it is secured tightly.
#6: Replace the two screws you removed earlier and tighten them securely.
#7: Place the crisper drawer back into the frame and slide it in until it is fully seated.
#8: Plug in your refrigerator's power cord and turn on the water supply line if necessary.
And you're done! With these easy steps, you have successfully replaced the 240599301 Frigidaire Refrigerator Crisper Drawer Frame Cover. Enjoy!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step By Step Guide:
#1: Unplug your refrigerator's power cord and shut off the water supply line if necessary.
#2: Remove the crisper drawer by pulling it halfway out and lifting it up and away from the crisper drawer frame.
#3: Locate the two screws that secure the 240599301 crisper drawer frame cover in place. Using a Phillips screwdriver, remove these two screws and set them aside.
#4: Pull the old crisper drawer cover out of the crisper drawer frame.
#5: Place the new 240599301 crisper drawer frame cover in the frame, and make sure it is secured tightly.
#6: Replace the two screws you removed earlier and tighten them securely.
#7: Place the crisper drawer back into the frame and slide it in until it is fully seated.
#8: Plug in your refrigerator's power cord and turn on the water supply line if necessary.
And you're done! With these easy steps, you have successfully replaced the 240599301 Frigidaire Refrigerator Crisper Drawer Frame Cover. Enjoy!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible brands information is not available for this part.