137221600 Frigidaire Washer Drain Pump
The 137221600 Frigidaire Washer Drain Pump is a great solution for your appliance needs. This drain pump is designed to help you easily get rid of water from the washer tub by pumping it out. It is compatible with most front load washing machines, including those from Frigidaire. With its durable construction and reliable performance, this drain pump is sure to last for years to come. Plus, it's easy to install and use, so you can have it up and running in no time. Get the dependable performance you need with the 137221600 Frigidaire Washer Drain Pump. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.8729 lbs
Dimension : 7.7952 x 6.3779 x 5.2362
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The 137221600 Frigidaire Washer Drain Pump is a great solution for your appliance needs. This drain pump is designed to help you easily get rid of water from the washer tub by pumping it out. It is compatible with most front load washing machines, including those from Frigidaire. With its durable construction and reliable performance, this drain pump is sure to last for years to come. Plus, it's easy to install and use, so you can have it up and running in no time. Get the dependable performance you need with the 137221600 Frigidaire Washer Drain Pump. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.8729 lbs
Dimension : 7.7952 x 6.3779 x 5.2362
Write Your Own Review
The following parts are replaced by this product
- 131724000
- 134051200
- 134740500
- 137108100
- 137151800KITK
- 137151800
Replacing the 137221600 Frigidaire Washer Drain Pump
#1 Unplug the washer: Make sure to unplug the power cord from the electrical outlet before beginning any repairs.
#2 Disconnect the hoses: Locate the water inlet and drain hoses connecting to the washer. Disconnect the hoses from both the washer and the wall.
#3 Remove the access panel: Depending on your model, the access panel may be located on the back of the washer or the side. Carefully remove the panel to expose the inside of the washer.
#4 Remove the old pump: Locate the drain pump and disconnect the electrical wires connected to it. Use a pair of pliers to remove the mounting bolts and pull the old pump away from the washer.
#5 Install the new pump: Place the new pump into the designated area and secure it with the mounting bolts. Reconnect the electrical wires to the new pump and make sure they are fastened securely.
#6 Reinstall the access panel: Place the access panel back onto the washer and make sure all screws are securely fastened.
#7 Reattach the hoses: Connect the water inlet and drain hoses to the washer and tighten them with pliers.
#8 Test the pump: Plug the washer in and test the pump by running a rinse cycle. Make sure the pump is draining the water properly.
#9 Enjoy: Once the replacement is complete, you can enjoy your new and improved washer!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
#1 Unplug the washer: Make sure to unplug the power cord from the electrical outlet before beginning any repairs.
#2 Disconnect the hoses: Locate the water inlet and drain hoses connecting to the washer. Disconnect the hoses from both the washer and the wall.
#3 Remove the access panel: Depending on your model, the access panel may be located on the back of the washer or the side. Carefully remove the panel to expose the inside of the washer.
#4 Remove the old pump: Locate the drain pump and disconnect the electrical wires connected to it. Use a pair of pliers to remove the mounting bolts and pull the old pump away from the washer.
#5 Install the new pump: Place the new pump into the designated area and secure it with the mounting bolts. Reconnect the electrical wires to the new pump and make sure they are fastened securely.
#6 Reinstall the access panel: Place the access panel back onto the washer and make sure all screws are securely fastened.
#7 Reattach the hoses: Connect the water inlet and drain hoses to the washer and tighten them with pliers.
#8 Test the pump: Plug the washer in and test the pump by running a rinse cycle. Make sure the pump is draining the water properly.
#9 Enjoy: Once the replacement is complete, you can enjoy your new and improved washer!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
