WE1M300 GE Dryer Bearing Bracket

Step 1: Shut off power to the washing machine by either unplugging it from the wall outlet or turn power off at the breaker box.

Step 2: Remove the top panel of the washing machine by removing the screws along the back of the machine.

Step 3: Remove the agitator by first unscrewing the retaining nut on the bottom of the agitator, then lifting the agitator off the shaft.

Step 4: Unscrew the WE1M300 GE Bearing Bracket from the base of the machine.

Step 5: Insert the new WE1M300 GE Bearing Bracket into the base of the machine and fasten it in place with screws.

Step 6: Re-insert the agitator and tighten the retaining nut.

Step 7: Put the top panel of the washing machine back into place and re-secure with screws.

Step 8: Restore power to the washing machine either by plugging it into the wall outlet or flipping the breaker switch in the breaker box.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.