WD2X295 GE Refrigerator Screw
Part #: GEN WD2X295
WD2X295 GE Refrigerator Screw
Weight : 0.038800 lbs
Dimension : 4.500000 x 4.000000 x 0.300000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
WD2X295 GE Refrigerator Screw
Weight : 0.038800 lbs
Dimension : 4.500000 x 4.000000 x 0.300000
Write Your Own Review
The following parts are replaced by this product
- WD02X0295
Replacing the GE WD2X295 Screw
1. Unplug the power cord of the GE appliance from the wall outlet and shut off the water supply to the unit.
2. Gather the necessary tools including a Phillips-head screwdriver, needle nose pliers, and screwdriver set.
3. Locate and remove the plastic or metal cover plate that covers the screw holes and screws on the appliance.
4. Remove the existing screws using a screwdriver or pliers and discard them.
5. Use a ruler to measure the distance between the screw holes and find the appropriate screws size needed to replace the GE WD2X295 screw.
6. Purchase the exact size screws at a local hardware store to replace the existing ones.
7. Insert the new screws through the screw holes and tighten them with a screwdriver.
8. Replace the cover plate and secure it with the screws.
9. Reconnect the power plug into the wall outlet and turn on the water supply to the appliance.
10. Test the appliance to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the power cord of the GE appliance from the wall outlet and shut off the water supply to the unit.
2. Gather the necessary tools including a Phillips-head screwdriver, needle nose pliers, and screwdriver set.
3. Locate and remove the plastic or metal cover plate that covers the screw holes and screws on the appliance.
4. Remove the existing screws using a screwdriver or pliers and discard them.
5. Use a ruler to measure the distance between the screw holes and find the appropriate screws size needed to replace the GE WD2X295 screw.
6. Purchase the exact size screws at a local hardware store to replace the existing ones.
7. Insert the new screws through the screw holes and tighten them with a screwdriver.
8. Replace the cover plate and secure it with the screws.
9. Reconnect the power plug into the wall outlet and turn on the water supply to the appliance.
10. Test the appliance to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.