WPW10340683 Whirlpool Manifold
The WPW10340683 Whirlpool Manifold We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.036 lbs
Dimension : 12 x 2.8 x 4
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The WPW10340683 Whirlpool Manifold We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.036 lbs
Dimension : 12 x 2.8 x 4
Write Your Own Review
The following parts are replaced by this product
- W10340683
DIY Guide to Replacing the WPW10340683 Whirlpool Manifold
Need a new manifold for your Whirlpool appliance? Replacing the WPW10340683 manifold is a simple task you can complete with just a few tools and parts. This DIY guide will show you how to make the switch in no time.
Tools & Parts Needed
- #2 Phillips Screwdriver
- Whirlpool WPW10340683 Manifold
Step 1: Unplug the Appliance
Safety is key when doing any repairs on an appliance, so make sure you unplug the appliance from the power source before beginning.
Step 2: Remove the Old Manifold
Using your #2 Phillips screwdriver, remove the screws securing the old manifold in place. Once the screws are removed, gently pull the manifold out of the appliance.
Step 3: Install the New Manifold
Take the new WPW10340683 Whirlpool manifold and insert it into the appliance. Secure it in place by re-installing the screws you removed in Step 2.
Step 4: Test the Manifold
Plug the appliance back in and run a test cycle to check the new manifold is working properly.
Congratulations! You have successfully replaced the WPW10340683 Whirlpool manifold.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Need a new manifold for your Whirlpool appliance? Replacing the WPW10340683 manifold is a simple task you can complete with just a few tools and parts. This DIY guide will show you how to make the switch in no time.
Tools & Parts Needed
- #2 Phillips Screwdriver
- Whirlpool WPW10340683 Manifold
Step 1: Unplug the Appliance
Safety is key when doing any repairs on an appliance, so make sure you unplug the appliance from the power source before beginning.
Step 2: Remove the Old Manifold
Using your #2 Phillips screwdriver, remove the screws securing the old manifold in place. Once the screws are removed, gently pull the manifold out of the appliance.
Step 3: Install the New Manifold
Take the new WPW10340683 Whirlpool manifold and insert it into the appliance. Secure it in place by re-installing the screws you removed in Step 2.
Step 4: Test the Manifold
Plug the appliance back in and run a test cycle to check the new manifold is working properly.
Congratulations! You have successfully replaced the WPW10340683 Whirlpool manifold.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
