WP99003118 Whirlpool Door Spring
Whirlpool WP99003118 SPRING-DOOR We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0647 lbs
Dimension : 9 x 0.62 x 0.62
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WP99003118 SPRING-DOOR We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0647 lbs
Dimension : 9 x 0.62 x 0.62
Write Your Own Review
The following parts are replaced by this product
- 99003118
DIY Instructions on Replacing the Whirlpool WP99003118 SPRING- DOOR
1. Unplug your refrigerator before attempting any repair.
2. To begin, locate the spring-door at the top of the refrigerator door and note how it is attached.
3. Use a Philips screwdriver to remove the screws that fasten the spring-door.
4. Carefully lift the spring-door off the refrigerator and place it aside.
5. Take note of the position of the screws attached to the spring-door so that you can reinstall it correctly.
6. Examine the attachment points on the door and ensure that they are not broken or damaged. If needed, use a screwdriver to remove any stubborn screws.
7. Take the replacement Whirlpool WP99003118 spring-door, line up the holes, and fasten it back onto the refrigerator.
8. Once secure, plug in the refrigerator.
9. Your replacement spring-door is now installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your refrigerator before attempting any repair.
2. To begin, locate the spring-door at the top of the refrigerator door and note how it is attached.
3. Use a Philips screwdriver to remove the screws that fasten the spring-door.
4. Carefully lift the spring-door off the refrigerator and place it aside.
5. Take note of the position of the screws attached to the spring-door so that you can reinstall it correctly.
6. Examine the attachment points on the door and ensure that they are not broken or damaged. If needed, use a screwdriver to remove any stubborn screws.
7. Take the replacement Whirlpool WP99003118 spring-door, line up the holes, and fasten it back onto the refrigerator.
8. Once secure, plug in the refrigerator.
9. Your replacement spring-door is now installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
