WP7406P428-60 Whirlpool Oven Bake Element
This Oven Lower Bake Element is a replacement part for the lower oven heating element that provides constant heat when cooking. If your oven does not bake properly, check to see if there is a burned-out section of the element. Replacing the part may alleviate this issue. To access the part, open the oven door and remove the racks.The bake element is held into the oven by two Phillips screws. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Be mindful not to let the wires connected to the current part fall back inside the oven when you disconnect them; retrieval of the wires will require additional steps during the installation process.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Weight : 10.7669 lbs
Dimension : 21.69 x 3.19 x 21.63
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Oven Lower Bake Element is a replacement part for the lower oven heating element that provides constant heat when cooking. If your oven does not bake properly, check to see if there is a burned-out section of the element. Replacing the part may alleviate this issue. To access the part, open the oven door and remove the racks.The bake element is held into the oven by two Phillips screws. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Be mindful not to let the wires connected to the current part fall back inside the oven when you disconnect them; retrieval of the wires will require additional steps during the installation process.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Weight : 10.7669 lbs
Dimension : 21.69 x 3.19 x 21.63
Write Your Own Review
The following parts are replaced by this product
- 74004107
- 7406P428-60
Replacing the WP7406P428-60 Whirlpool Bake Element
1. Disconnect the power before working on any electrical appliance.
2. Remove the screws from the back panel of your oven and take the panel off to expose the bake element.
3. Unscrew the two screws that hold the element in place.
4. Carefully remove and inspect the element to determine if it is the correct type for your oven.
5. If necessary, replace the old element with the new one. The WP7406P428-60 Whirlpool Bake Element should be a direct replacement.
6. Secure the element in place with the two screws, then put the back panel back and tighten the screws.
7. Reconnect the power to the oven.
8. Test the element by turning on the oven to see if it is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Disconnect the power before working on any electrical appliance.
2. Remove the screws from the back panel of your oven and take the panel off to expose the bake element.
3. Unscrew the two screws that hold the element in place.
4. Carefully remove and inspect the element to determine if it is the correct type for your oven.
5. If necessary, replace the old element with the new one. The WP7406P428-60 Whirlpool Bake Element should be a direct replacement.
6. Secure the element in place with the two screws, then put the back panel back and tighten the screws.
7. Reconnect the power to the oven.
8. Test the element by turning on the oven to see if it is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
