WP67005959 Whirlpool Maytag Refrigerator Ice Bucket
The SxS Refrigerator Ice Crusher Bucket stores ice cubes in the freezer section of your refrigerator. If your current part is cracked, broken, or it won't dispense ice, you may meed to replace this part. To access this part, remove your current bucket and release its back panel. Then remove the 2 retaining screws so you can pull off the front auger assembly. Installing this part will require basic tools, some disassembly of the refrigerator and prior repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Crusher Bucket
• Tools Needed: 1/4" nut driver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Crusher Bucket
• Tools Needed: 1/4" nut driver
Weight : 13.4676 lbs
Dimension : 15.62 x 13.25 x 9.25
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The SxS Refrigerator Ice Crusher Bucket stores ice cubes in the freezer section of your refrigerator. If your current part is cracked, broken, or it won't dispense ice, you may meed to replace this part. To access this part, remove your current bucket and release its back panel. Then remove the 2 retaining screws so you can pull off the front auger assembly. Installing this part will require basic tools, some disassembly of the refrigerator and prior repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Crusher Bucket
• Tools Needed: 1/4" nut driver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Crusher Bucket
• Tools Needed: 1/4" nut driver
Weight : 13.4676 lbs
Dimension : 15.62 x 13.25 x 9.25
Write Your Own Review
The following parts are replaced by this product
- 12517801
- 67005067
- 67005959
- 67005959
Replacing the Whirlpool WP67005959 BUCKET- ICEMAKER
Are you looking for an easy way to replace the Whirlpool WP67005959 BUCKET- ICEMAKER? This DIY guide will provide step-by-step instructions on how to replace your icemaker quickly and safely.
Step 1: Unplug the Refrigerator
The first step in replacing your icemaker is to unplug the refrigerator from its power source. This helps to ensure your safety and prevent any possible electrical shocks.
Step 2: Locate the Ice Maker
Locate the ice maker by looking at the back of your refrigerator. The ice maker should be located near the top of the refrigerator.
Step 3: Disconnect the Water Line
Once you have located the ice maker, use a wrench to disconnect the water line from the back of the refrigerator. This will help to prevent any leaking water during the replacement process.
Step 4: Remove the Ice Maker
Using a screwdriver, gently remove all of the screws holding the icemaker in place. Once the screws are removed, the icemaker can be removed from the refrigerator.
Step 5: Install the New Ice Maker
Gently place the new icemaker in the space provided. Reattach all of the screws that were removed in Step 4 to hold the icemaker in place.
Step 6: Reconnect the Water Line
Now that the new icemaker is installed, it’s time to reconnect the water line. This should be done carefully to avoid any potential leaks or damage.
Step 7: Plug the Refrigerator Back In
Once the icemaker is securely in place and the water line is connected, plug the refrigerator back in and test the new icemaker to make sure it operates correctly.
With these 7 simple steps, you can easily replace your Whirlpool WP67005959 BUCKET- ICEMAKER. Good luck with your project and enjoy your new icemaker!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking for an easy way to replace the Whirlpool WP67005959 BUCKET- ICEMAKER? This DIY guide will provide step-by-step instructions on how to replace your icemaker quickly and safely.
Step 1: Unplug the Refrigerator
The first step in replacing your icemaker is to unplug the refrigerator from its power source. This helps to ensure your safety and prevent any possible electrical shocks.
Step 2: Locate the Ice Maker
Locate the ice maker by looking at the back of your refrigerator. The ice maker should be located near the top of the refrigerator.
Step 3: Disconnect the Water Line
Once you have located the ice maker, use a wrench to disconnect the water line from the back of the refrigerator. This will help to prevent any leaking water during the replacement process.
Step 4: Remove the Ice Maker
Using a screwdriver, gently remove all of the screws holding the icemaker in place. Once the screws are removed, the icemaker can be removed from the refrigerator.
Step 5: Install the New Ice Maker
Gently place the new icemaker in the space provided. Reattach all of the screws that were removed in Step 4 to hold the icemaker in place.
Step 6: Reconnect the Water Line
Now that the new icemaker is installed, it’s time to reconnect the water line. This should be done carefully to avoid any potential leaks or damage.
Step 7: Plug the Refrigerator Back In
Once the icemaker is securely in place and the water line is connected, plug the refrigerator back in and test the new icemaker to make sure it operates correctly.
With these 7 simple steps, you can easily replace your Whirlpool WP67005959 BUCKET- ICEMAKER. Good luck with your project and enjoy your new icemaker!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
