WP67003226 Whirlpool Auger Motor
Whirlpool WP67003226 MOTOR. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.8633 lbs
Dimension : 4.75 x 4.25 x 5.88
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WP67003226 MOTOR. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.8633 lbs
Dimension : 4.75 x 4.25 x 5.88
Write Your Own Review
The following parts are replaced by this product
- 67003226
DIY Instructions for Replacing the Whirlpool WP67003226 Motor Washer
If your Whirlpool WP67003226 motor washer needs to be replaced, don’t panic — you can easily replace it yourself with a few simple steps. Read on to learn more about this DIY project and how to get it done safely and efficiently.
Step 1: Unplug the power cord from the wall.
Step 2: Locate the screws holding the motor in place. This can typically be found near the bottom of the washer.
Step 3: Use a screwdriver to remove the screws and carefully set aside.
Step 4: Carefully pull the old motor out of the washer.
Step 5: Place the new motor into the washer.
Step 6: Secure the new motor in place by using the same screws you used to remove the old one.
Step 7: Plug the power cord back into the wall.
Step 8: Turn on the washer and allow it to run through a cycle to ensure the new motor is working properly.
Congratulations — you have successfully replaced the Whirlpool WP67003226 motor washer! Now you can enjoy your appliance worry-free. For more helpful tips on do-it-yourself home repairs, check out our blog!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your Whirlpool WP67003226 motor washer needs to be replaced, don’t panic — you can easily replace it yourself with a few simple steps. Read on to learn more about this DIY project and how to get it done safely and efficiently.
Step 1: Unplug the power cord from the wall.
Step 2: Locate the screws holding the motor in place. This can typically be found near the bottom of the washer.
Step 3: Use a screwdriver to remove the screws and carefully set aside.
Step 4: Carefully pull the old motor out of the washer.
Step 5: Place the new motor into the washer.
Step 6: Secure the new motor in place by using the same screws you used to remove the old one.
Step 7: Plug the power cord back into the wall.
Step 8: Turn on the washer and allow it to run through a cycle to ensure the new motor is working properly.
Congratulations — you have successfully replaced the Whirlpool WP67003226 motor washer! Now you can enjoy your appliance worry-free. For more helpful tips on do-it-yourself home repairs, check out our blog!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
