WP2252265 Whirlpool Refrigerator Ice Bin Button
This Ice Bin Release Button, Blue actuates the bin release lever when you push it. This unlocks the ice bin from its housing. To access the part, remove the ice bucket from the door. Press the release valve to release the bucket from the door and remove any ice from the bin. Turn the bucket upside down and you should see the ice bin button on the left hand side. There should be 2 screws securing it in place. Unscrew them and remove the old ice bin button. Screw the new ice bin button in place and put the ice bucket back on the door. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. Please remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Ice Bin Release Button, Blue
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Ice Bin Release Button, Blue
• Tools Needed: Multi screwdriver
Weight : 0.2131 lbs
Dimension : 4.7244 x 4.685 x 1.3385
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Ice Bin Release Button, Blue actuates the bin release lever when you push it. This unlocks the ice bin from its housing. To access the part, remove the ice bucket from the door. Press the release valve to release the bucket from the door and remove any ice from the bin. Turn the bucket upside down and you should see the ice bin button on the left hand side. There should be 2 screws securing it in place. Unscrew them and remove the old ice bin button. Screw the new ice bin button in place and put the ice bucket back on the door. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. Please remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Ice Bin Release Button, Blue
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Ice Bin Release Button, Blue
• Tools Needed: Multi screwdriver
Weight : 0.2131 lbs
Dimension : 4.7244 x 4.685 x 1.3385
Write Your Own Review
The following parts are replaced by this product
- 2252265
Replacing the Whirlpool WP2252265 BUTTON-BIN
1. Unplug your appliance from the power source before beginning.
2. Locate the button bin located on the inside wall of the dryer.
3. Unscrew the screws that are holding the button bin in place.
4. Carefully remove the button bin from the wall.
5. Place the new button bin in position and secure with screws.
6. Re-connect any wiring, as necessary.
7. Plug your appliance back into the power source and test the new button bin.
Follow these easy steps to replace the Whirlpool WP2252265 BUTTON-BIN and maintain optimal performance of your dryer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your appliance from the power source before beginning.
2. Locate the button bin located on the inside wall of the dryer.
3. Unscrew the screws that are holding the button bin in place.
4. Carefully remove the button bin from the wall.
5. Place the new button bin in position and secure with screws.
6. Re-connect any wiring, as necessary.
7. Plug your appliance back into the power source and test the new button bin.
Follow these easy steps to replace the Whirlpool WP2252265 BUTTON-BIN and maintain optimal performance of your dryer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
