WP213045 Whirlpool Tub to Pump Hose
The Top Load Washer Tub to Pump Hose stretches from the lower tub into the drain pump and helps remove waste water from the appliance during operation. If water is leaking from the bottom of the washer, the current hose could be cracked or damaged and require replacement. Installing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Tub to Pump Hose
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Tub to Pump Hose
• Tools Needed: Multi screwdriver, putty knife
Weight : 0.5832 lbs
Dimension : 12.244 x 3.5039 x 1.8897
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Top Load Washer Tub to Pump Hose stretches from the lower tub into the drain pump and helps remove waste water from the appliance during operation. If water is leaking from the bottom of the washer, the current hose could be cracked or damaged and require replacement. Installing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Tub to Pump Hose
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Tub to Pump Hose
• Tools Needed: Multi screwdriver, putty knife
Weight : 0.5832 lbs
Dimension : 12.244 x 3.5039 x 1.8897
Write Your Own Review
The following parts are replaced by this product
- 213045
Replacing the Whirlpool WP213045 Drain Hose
Tools needed:
• Adjustable wrench
• Pliers
• New Whirlpool WP213045 Drain Hose
Instructions:
1. Locate your dishwasher’s drain hose and determine if it's the correct match for the Whirlpool WP213045 Drain Hose.
2. Turn off the water supply to the dishwasher. This can usually be done by turning off the valves under the sink.
3. Using an adjustable wrench, loosen the clamp that holds the drain hose in place.
4. Remove the old drain hose and dispose of it properly.
5. Insert the new Whirlpool WP213045 Drain Hose into the hole in the dishwasher and make sure it is fitted securely.
6. Place the clamp back in place and tighten it securely with the adjustable wrench.
7. Turn the water supply back on and make sure there are no leaks.
8. Test the dishwasher to make sure it is draining properly.
Congratulations! You have successfully replaced the Whirlpool WP213045 Drain Hose!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools needed:
• Adjustable wrench
• Pliers
• New Whirlpool WP213045 Drain Hose
Instructions:
1. Locate your dishwasher’s drain hose and determine if it's the correct match for the Whirlpool WP213045 Drain Hose.
2. Turn off the water supply to the dishwasher. This can usually be done by turning off the valves under the sink.
3. Using an adjustable wrench, loosen the clamp that holds the drain hose in place.
4. Remove the old drain hose and dispose of it properly.
5. Insert the new Whirlpool WP213045 Drain Hose into the hole in the dishwasher and make sure it is fitted securely.
6. Place the clamp back in place and tighten it securely with the adjustable wrench.
7. Turn the water supply back on and make sure there are no leaks.
8. Test the dishwasher to make sure it is draining properly.
Congratulations! You have successfully replaced the Whirlpool WP213045 Drain Hose!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
