W11311686 Whirlpool Closing Cam
Whirlpool W11311686 CAM-DOOR-LOCK We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0144 lbs
Dimension : 2 x 1.125 x 1
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11311686 CAM-DOOR-LOCK We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0144 lbs
Dimension : 2 x 1.125 x 1
Write Your Own Review
The following parts are replaced by this product
- W10412751
- WPW10412751
- W10738914
- W11227364
DIY: How to Replace the Whirlpool W11311686 Cam-Door
Replacing the Whirlpool W11311686 cam-door is a fairly straightforward task that can be completed fairly quickly if you have the right tools. This guide will walk you through the steps of removing and replacing the part.
Materials Needed:
1. Phillips head screwdriver
2. Flathead screwdriver
3. New Whirlpool W11311686 cam-door
Instructions:
1. Begin by unplugging your appliance from its power source.
2. Use the Phillips head screwdriver to remove the screws around the edge of the appliance door.
3. Carefully lift off the door panel, setting it aside.
4. Locate the cam-door assembly and note its position within the appliance.
5. Use the flathead screwdriver to loosen the screws holding the cam-door in place.
6. Carefully remove the old cam-door.
7. Take the new Whirlpool W11311686 cam-door and install it in the same way as the old one.
8. Secure the cam-door into place with the screws.
9. Replace the door panel and secure it with the original screws.
10. Plug the appliance back in and test the cam-door to ensure it’s working properly.
Congratulations – you have now successfully replaced the Whirlpool W11311686 cam-door!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool W11311686 cam-door is a fairly straightforward task that can be completed fairly quickly if you have the right tools. This guide will walk you through the steps of removing and replacing the part.
Materials Needed:
1. Phillips head screwdriver
2. Flathead screwdriver
3. New Whirlpool W11311686 cam-door
Instructions:
1. Begin by unplugging your appliance from its power source.
2. Use the Phillips head screwdriver to remove the screws around the edge of the appliance door.
3. Carefully lift off the door panel, setting it aside.
4. Locate the cam-door assembly and note its position within the appliance.
5. Use the flathead screwdriver to loosen the screws holding the cam-door in place.
6. Carefully remove the old cam-door.
7. Take the new Whirlpool W11311686 cam-door and install it in the same way as the old one.
8. Secure the cam-door into place with the screws.
9. Replace the door panel and secure it with the original screws.
10. Plug the appliance back in and test the cam-door to ensure it’s working properly.
Congratulations – you have now successfully replaced the Whirlpool W11311686 cam-door!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
