W11189144 Whirlpool Felt Seal

Replacing the Whirlpool W11189144 SEAL KIT

1. Unplug the power cord from your wall outlet to disconnect the power supply.

2. Open the door of your washing machine and take out all the clothes inside.

3. Locate the access panel on the front of the washer by removing screws that hold it in place.

4. Remove the old seal kit by taking out the mounting bolts.

5. Clean the area around the seal and the mounting bolt holes, making sure that there is no debris in the way.

6. Place the new Whirlpool W11189144 Seal Kit into place and secure it with the mounting bolts.

7. Replace the access panel and secure it with the screws.

8. Plug the power cord back into the wall outlet and turn on the power switch.

9. Test the washing machine to ensure that it works properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.