W10876537 Whirlpool Dishwasher Drain Pump
The Dishwasher Drain Pump is located at the bottom of your dishwasher and is the mechanism that drains the water. If your water isn't draining, the motor of the drain pump may have shorted out, or the body of the drain pump could be cracked. Replacing the pump may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the Dishwasher and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the oven before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner* (item W10282479) to help reduce limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Drain Pump
• Tools Needed: Multi screwdriver, 5/8" wrench
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Drain Pump
• Tools Needed: Multi screwdriver, 5/8" wrench
Weight : 0.4489 lbs
Dimension : 4.37 x 4.37 x 3.2677
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dishwasher Drain Pump is located at the bottom of your dishwasher and is the mechanism that drains the water. If your water isn't draining, the motor of the drain pump may have shorted out, or the body of the drain pump could be cracked. Replacing the pump may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the Dishwasher and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the oven before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner* (item W10282479) to help reduce limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Drain Pump
• Tools Needed: Multi screwdriver, 5/8" wrench
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Drain Pump
• Tools Needed: Multi screwdriver, 5/8" wrench
Weight : 0.4489 lbs
Dimension : 4.37 x 4.37 x 3.2677
Write Your Own Review
The following parts are replaced by this product
- W10724439
- DW6537
1. Start by unplugging the power cord from the dishwasher and turning off the water supply.
2. Remove the lower access panel from the dishwasher to access the drain pump. This may require removing fasteners or screws.
3. Unscrew the clamp that secures the drain hose to the drain pump.
4. Disconnect the wiring harness along the side of the drain pump.
5. Unscrew the mounting bracket that holds the pump in place, then slide it off the pump.
6. Remove the old W10876537 Whirlpool Dishwasher Drain Pump from the dishwasher.
7. Slide the new pump in to place and secure it with the mounting bracket and screws.
8. Reconnect the wiring harness and secure the drain hose to the pump.
9. Re-attach the access panel and make sure all screws are tight.
10. Plug in the power cord and turn the water supply back on.
11. Test the dishwasher to make sure it is draining properly and the new W10876537 Whirlpool Dishwasher Drain Pump is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the lower access panel from the dishwasher to access the drain pump. This may require removing fasteners or screws.
3. Unscrew the clamp that secures the drain hose to the drain pump.
4. Disconnect the wiring harness along the side of the drain pump.
5. Unscrew the mounting bracket that holds the pump in place, then slide it off the pump.
6. Remove the old W10876537 Whirlpool Dishwasher Drain Pump from the dishwasher.
7. Slide the new pump in to place and secure it with the mounting bracket and screws.
8. Reconnect the wiring harness and secure the drain hose to the pump.
9. Re-attach the access panel and make sure all screws are tight.
10. Plug in the power cord and turn the water supply back on.
11. Test the dishwasher to make sure it is draining properly and the new W10876537 Whirlpool Dishwasher Drain Pump is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
