5304485917 Frigidaire Washer Shock Absorber Air Stabilizer

5304485917 Frigidaire Washer Shock Absorber Air Stabilizer
Weight : 0.488800 lbs
Dimension : 9.724400 x 3.622000 x 1.929100
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
5304485917 Frigidaire Washer Shock Absorber Air Stabilizer
Weight : 0.488800 lbs
Dimension : 9.724400 x 3.622000 x 1.929100
Write Your Own Review
The following parts are replaced by this product
- 131268200
- 134564200
- 134560400
- 5304467357
- 134999000
- 134560410
- 134999010
Step-by-Step Guide to Replacing a 5304485917 Frigidaire Washer Shock Absorber, Air, Stabilizer
1. Unplug the washer from the wall outlet and shut off the water supply valves for the washer.
2. With the help of a helper, tilt the washer back onto the rear legs and remove the screws from the bottom access panel at the back and side of the washer.
3. Pull the panel off from the back of the washer to expose the shock absorber, air and stabilizer unit.
4. Unscrew the mounting bolts and detach the old shock absorber, air, and stabilizer unit.
5. Attach the new 5304485917 Frigidaire Washer Shock Absorber, Air, Stabilizer using the original mounting bolts.
6. Reattach the access panel to the back and side of the washer.
7. Plug the washer back into the wall outlet and turn on the water supply valves.
8. Finally, test the new shock absorber, air, and stabilizer unit to check if it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the washer from the wall outlet and shut off the water supply valves for the washer.
2. With the help of a helper, tilt the washer back onto the rear legs and remove the screws from the bottom access panel at the back and side of the washer.
3. Pull the panel off from the back of the washer to expose the shock absorber, air and stabilizer unit.
4. Unscrew the mounting bolts and detach the old shock absorber, air, and stabilizer unit.
5. Attach the new 5304485917 Frigidaire Washer Shock Absorber, Air, Stabilizer using the original mounting bolts.
6. Reattach the access panel to the back and side of the washer.
7. Plug the washer back into the wall outlet and turn on the water supply valves.
8. Finally, test the new shock absorber, air, and stabilizer unit to check if it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible brands information is not available for this part.