802317P Speed Queen Washer Door Lock and Switch Assembly
802317P Speed Queen Washer Door Lock and Switch Assembly
Weight : 0.238800 lbs
Dimension : 4.488100 x 4.370000 x 1.692900
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
802317P Speed Queen Washer Door Lock and Switch Assembly
Weight : 0.238800 lbs
Dimension : 4.488100 x 4.370000 x 1.692900
Write Your Own Review
The following parts are replaced by this product
- 802317
Replacing the Speed Queen Washer Door Lock and Switch Assembly (802317P)
1. Unplug the washer from the wall outlet.
2. Open the lid of the washer and locate the door lock and switch assembly. The assembly is usually located in the middle of the machine, near or beneath the lid.
3. Using a Phillips head screwdriver, remove the screws that secure the door lock and switch assembly to the washer.
4. Disconnect the two wiring harnesses connected to the door lock and switch assembly.
5. Remove the old door lock and switch assembly.
6. Install the new door lock and switch assembly. Make sure the new unit is properly aligned before securing with the screws.
7. Reconnect the two wiring harnesses to the new door lock and switch assembly.
8. Replace the screws that secure the door lock and switch assembly to the washer.
9. Plug the washer back in to the wall outlet and test the new door lock and switch assembly to ensure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the washer from the wall outlet.
2. Open the lid of the washer and locate the door lock and switch assembly. The assembly is usually located in the middle of the machine, near or beneath the lid.
3. Using a Phillips head screwdriver, remove the screws that secure the door lock and switch assembly to the washer.
4. Disconnect the two wiring harnesses connected to the door lock and switch assembly.
5. Remove the old door lock and switch assembly.
6. Install the new door lock and switch assembly. Make sure the new unit is properly aligned before securing with the screws.
7. Reconnect the two wiring harnesses to the new door lock and switch assembly.
8. Replace the screws that secure the door lock and switch assembly to the washer.
9. Plug the washer back in to the wall outlet and test the new door lock and switch assembly to ensure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
