201402P Speed Queen Mixing Valve 120V 60Hz
Part #: SPQ 201402P
201402P Speed Queen Mixing Valve 120V 60Hz
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
201402P Speed Queen Mixing Valve 120V 60Hz
Write Your Own Review
The following parts are replaced by this product
- 39069
1. Begin by turning off the power to Speed Queen 201402P valve, mixing 120V 60HZ by unplugging the power cord or switching it off at the circuit breaker.
2. Drain the water from the system.
3. Remove the existing valve by loosen the mounting screws on the valve body.
4. Disconnect the hoses and wiring from the old valve.
5. Install the new valve in the same location as the old valve.
6. Connect the hoses and wiring to the new valve in the same way they were connected to the old valve.
7. Tighten the mounting screws securely.
8. Turn on the power to the Speed Queen 201402P valve, mixing 120V 60HZ.
9. Check for any leaks in the hose connections or the valve body and tighten if needed.
10. Test the valve and ensure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Drain the water from the system.
3. Remove the existing valve by loosen the mounting screws on the valve body.
4. Disconnect the hoses and wiring from the old valve.
5. Install the new valve in the same location as the old valve.
6. Connect the hoses and wiring to the new valve in the same way they were connected to the old valve.
7. Tighten the mounting screws securely.
8. Turn on the power to the Speed Queen 201402P valve, mixing 120V 60HZ.
9. Check for any leaks in the hose connections or the valve body and tighten if needed.
10. Test the valve and ensure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible brands information is not available for this part.