WP74002353 Whirlpool Control Knob
Whirlpool WP74002353We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0576 lbs
Dimension : 2 x 2 x 1.75
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WP74002353We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0576 lbs
Dimension : 2 x 2 x 1.75
Write Your Own Review
The following parts are replaced by this product
- 74002353
DIY Guide to Replacing the Whirlpool WP74002353 KNOB- VALVE
Replacing a worn or damaged valve knob on your Whirlpool WP74002353 water heater can be a simple and straightforward do-it-yourself (DIY) project. Follow the steps below to complete the replacement process with ease.
1. Shut off power to the Whirlpool WP74002353 water heater before beginning the replacement process. This is an important safety measure as electricity and water can be a deadly combination.
2. Remove the old knob by unscrewing it counterclockwise from the valve stem.
3. Remove any washers that may be attached to the valve stem.
4. Take the new Whirlpool WP74002353 valve knob and insert it onto the stem. Secure it tightly by tightening the knob in a clockwise direction.
5. Reattach any washers if necessary.
6. Turn the power back on to the water heater and test out the valve knob to make sure it is functioning properly.
Following these easy steps, you can easily replace the Whirlpool WP74002353 valve knob. Make sure to follow all safety precautions when handling electrical appliances and shut off the power to the water heater before beginning any DIY replacement project.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a worn or damaged valve knob on your Whirlpool WP74002353 water heater can be a simple and straightforward do-it-yourself (DIY) project. Follow the steps below to complete the replacement process with ease.
1. Shut off power to the Whirlpool WP74002353 water heater before beginning the replacement process. This is an important safety measure as electricity and water can be a deadly combination.
2. Remove the old knob by unscrewing it counterclockwise from the valve stem.
3. Remove any washers that may be attached to the valve stem.
4. Take the new Whirlpool WP74002353 valve knob and insert it onto the stem. Secure it tightly by tightening the knob in a clockwise direction.
5. Reattach any washers if necessary.
6. Turn the power back on to the water heater and test out the valve knob to make sure it is functioning properly.
Following these easy steps, you can easily replace the Whirlpool WP74002353 valve knob. Make sure to follow all safety precautions when handling electrical appliances and shut off the power to the water heater before beginning any DIY replacement project.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
