WP40113801 Whirlpool Dryer High Limit Thermal Fuse
The Dryer Thermal Fuse shuts off the burner in a gas dryer or the motor in an electric dryer when the appliance overheats. If your dryer won't start or will run but no longer heat, replacing this part may alleviate the issue. Note that the thermal fuse cannot be reset. Fuses may blow due to a clogged dryer vent, so make sure you clean out this vent when installing the new part. The fuse is located behind the lower front access panel of the dryer. For easier access, you may want to remove the dryer drum behind the entire front panel. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Thermal Fuse
• Tools Needed: Multi screwdriver, standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Thermal Fuse
• Tools Needed: Multi screwdriver, standard pliers
Weight : 0.0103 lbs
Dimension : 1.811 x 0.748 x 1.0629
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dryer Thermal Fuse shuts off the burner in a gas dryer or the motor in an electric dryer when the appliance overheats. If your dryer won't start or will run but no longer heat, replacing this part may alleviate the issue. Note that the thermal fuse cannot be reset. Fuses may blow due to a clogged dryer vent, so make sure you clean out this vent when installing the new part. The fuse is located behind the lower front access panel of the dryer. For easier access, you may want to remove the dryer drum behind the entire front panel. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Thermal Fuse
• Tools Needed: Multi screwdriver, standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Thermal Fuse
• Tools Needed: Multi screwdriver, standard pliers
Weight : 0.0103 lbs
Dimension : 1.811 x 0.748 x 1.0629
Write Your Own Review
The following parts are replaced by this product
- 62600
- 62600
- 40113801
- 40113801
1. Unplug the power cord for the appliance from the wall outlet to disconnect it from the power source.
2. Find the Whirlpool High Limit Thermal Fuse (WP40113801) in the appliance. This is usually found either behind the control panel or behind the rear of the oven. It will likely be connected to wiring with a clip or screw.
3. Remove the wiring and screws, if any, to take out the old fuse.
4. Install the new fuse in place of the old one. Secure it in place with the screws or clips (if any).
5. Plug the power cord of the appliance back into the wall outlet.
6. Test the oven to make sure the new Whirlpool High Limit Thermal Fuse (WP40113801) is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Find the Whirlpool High Limit Thermal Fuse (WP40113801) in the appliance. This is usually found either behind the control panel or behind the rear of the oven. It will likely be connected to wiring with a clip or screw.
3. Remove the wiring and screws, if any, to take out the old fuse.
4. Install the new fuse in place of the old one. Secure it in place with the screws or clips (if any).
5. Plug the power cord of the appliance back into the wall outlet.
6. Test the oven to make sure the new Whirlpool High Limit Thermal Fuse (WP40113801) is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
