W11266654 Whirlpool Washer Door Boot Seal Clamp
The Washer Outer Door Boot Seal Clamp holds the washer bellow seal (door boot) in place in the appliance's frame. If the existing part is broken, rusted or missing, replacing this part may alleviate the issue. The clamp measures approx. 16-1/2" D and is sold separately. Replacing this part will require basic hand tools, minor disassembly of the washer and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Also consider replacing the Washer Door Boot Seal (item WP8182119) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Washer Outer Door Boot Seal Clamp
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Washer Outer Door Boot Seal Clamp
• Tools Needed: Multi screwdriver
Weight : 0.102200 lbs
Dimension : 8.818800 x 5.118100 x 0.314900
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Washer Outer Door Boot Seal Clamp holds the washer bellow seal (door boot) in place in the appliance's frame. If the existing part is broken, rusted or missing, replacing this part may alleviate the issue. The clamp measures approx. 16-1/2" D and is sold separately. Replacing this part will require basic hand tools, minor disassembly of the washer and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Also consider replacing the Washer Door Boot Seal (item WP8182119) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Washer Outer Door Boot Seal Clamp
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Washer Outer Door Boot Seal Clamp
• Tools Needed: Multi screwdriver
Weight : 0.102200 lbs
Dimension : 8.818800 x 5.118100 x 0.314900
Write Your Own Review
The following parts are replaced by this product
- W10237503
- WPW10237503
Step 1: Unplug the Washer from Outlet
Step 2: Remove the screws and panels from the back of the washer.
Step 3: Open the washer cabinet and locate the W11266654 Whirlpool Washer Outer Door Boot Seal Clamp.
Step 4: Using a screwdriver, remove the screws that secure the clamp to the washer.
Step 5: Pull out the old seal clamp and clean the area where it was attached.
Step 6: Place the new W11266654 Whirlpool Washer Outer Door Boot Seal Clamp in the same place as the old one, making sure that all the parts are lined up properly.
Step 7: Secure the new seal clamp with the screws you previously removed.
Step 8: Replace all the panels and screws and reconnect the power cord.
Step 9: Test the washer to ensure that the door seal is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the screws and panels from the back of the washer.
Step 3: Open the washer cabinet and locate the W11266654 Whirlpool Washer Outer Door Boot Seal Clamp.
Step 4: Using a screwdriver, remove the screws that secure the clamp to the washer.
Step 5: Pull out the old seal clamp and clean the area where it was attached.
Step 6: Place the new W11266654 Whirlpool Washer Outer Door Boot Seal Clamp in the same place as the old one, making sure that all the parts are lined up properly.
Step 7: Secure the new seal clamp with the screws you previously removed.
Step 8: Replace all the panels and screws and reconnect the power cord.
Step 9: Test the washer to ensure that the door seal is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
