W10899551 Whirlpool Door Handle

How to Replace a Whirlpool W10899551 Handle

Replacing your Whirlpool washing machine’s handle is an easy and cost-effective DIY project. Replacing the handle will offer a fresh, new look to your appliance and the entire laundry space. Follow the below steps for a successful handle replacement.

Tools Required

• Phillips screwdriver

• Crescent wrench

Instructions

1. Unplug your washing machine from the wall socket to eliminate the risk of electrical shock.

2. Remove the Phillips screws that secure the old handle to the machine’s body. If the screws have corroded use a crescent wrench to loosen them.

3. Lift up on the old handle and pull it away from the machine.

4. Place the new handle into position and line up the screw holes with the holes in the door.

5. Secure the new handle with the Phillips screws. If they have corroded use the crescent wrench.

6. Plug the washing machine back into the wall socket.

7. Test the handle to make sure it is secure.

Your Whirlpool washing machine’s handle has now been replaced with a new and stylish handle. With proper maintenance and care, this part can last for many years.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.