4H00982E LG Compressor Damper
The LG 4H00982E Damper/Compressor . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.018900 lbs
Dimension : 1.460000 x 1.260000 x 1.420000
The LG 4H00982E Damper/Compressor . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.018900 lbs
Dimension : 1.460000 x 1.260000 x 1.420000
Write Your Own Review
Step 1: Gather the necessary tools and supplies. To replace an LG 4H00982E Damper, you will need a pair of safety glasses, a Phillips screwdriver, a hammer, a flat-head screwdriver, a torque wrench, and a new LG 4H00982E Damper.
Step 2: Turn off the power source to the unit. Make sure that all power sources have been shut off before you begin working on the unit.
Step 3: Open the unit and locate the damper. On the side of the unit, there should be a panel with several screws. Remove these screws using the Phillips screwdriver. Then open up the panel and locate the LG 4H00982E Damper.
Step 4: Remove the damper from the unit. Using the hammer and the flat-head screwdriver, gently tap around the edges of the damper until it slips off the unit.
Step 5: Install the new damper. Line up the new damper with the old one and make sure that it fits snugly in place. Once lined up, use the torque wrench to tighten the screws.
Step 6: Reattach the panel and close up the unit. After the new damper is in place, reattach the panel and screw it back in place. Then close up the unit and turn the power source back on.
And that's it! You've now successfully replaced an LG 4H00982E Damper.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Turn off the power source to the unit. Make sure that all power sources have been shut off before you begin working on the unit.
Step 3: Open the unit and locate the damper. On the side of the unit, there should be a panel with several screws. Remove these screws using the Phillips screwdriver. Then open up the panel and locate the LG 4H00982E Damper.
Step 4: Remove the damper from the unit. Using the hammer and the flat-head screwdriver, gently tap around the edges of the damper until it slips off the unit.
Step 5: Install the new damper. Line up the new damper with the old one and make sure that it fits snugly in place. Once lined up, use the torque wrench to tighten the screws.
Step 6: Reattach the panel and close up the unit. After the new damper is in place, reattach the panel and screw it back in place. Then close up the unit and turn the power source back on.
And that's it! You've now successfully replaced an LG 4H00982E Damper.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
